Imagenología ultrasónica mediante formación de haz biaxial de elemento único

Dynamic focusing of received ultrasound signals, or beamforming, is foundational for ultrasound imaging. Conventionally, it requires arrays of ultrasound sensors to estimate where sound came from using time-of-flight (TOF) measurements. We demonstrate passive beamforming with a single biaxial sensor and accurate passive acoustic mapping with two biaxial sensors using only direction of arrival (DOA) information.

We introduce two single-element biaxial beamforming algorithms and four biaxial image reconstruction algorithms for a two-element biaxial piezoceramic transducer array. Imaging of a hemispherical acoustic source is characterized in an acoustic scanning tank within the region $-30.29\mathrm{mm}$ $\le x\le$ 29.94 mm and 50.11 mm $\le z\le$ 90.45 mm relative to the center of the array. Imaging performance is contrasted with delay, sum, and integrate (DSAI) and delay, multiply, sum, and integrate (DMSAI) algorithms.

Single-element biaxial beamforming can identify DOA with a median error (± interquartile range) of $0.36\pm 0.63\mathrm{deg}$ and median full-width half-prominence of $7.3\pm 8.6\mathrm{deg}$ . Using both array elements, DOA-only images demonstrate overall median localization error of 6.41 mm (lateral: 1.02 mm, axial: 5.85 mm, signal-to-noise ratio (SNR): 15.37) and DOA + TOF images demonstrate overall median error of 6.91 mm (lateral: 1.69 mm, axial: 6.11 mm, SNR: 18.37).

To the best of our knowledge, we provide the first demonstration of single-element beamforming using a single stationary piezoceramic and the first demonstration of passive ultrasound imaging without the use of TOF information. These results enable simpler, smaller, more cost-effective arrays for passive ultrasound imaging.