Sensor táctil piezoeléctrico flexible basado en PVDF para la estimación de deslizamiento mediante pinza robótica

Robotic grippers are widely utilized in industrial manufacturing, but object slippage during assembly poses challenges, including potential damage, delays, and increased costs. Therefore, early slip detection is crucial for efficient manufacturing operations. Piezoelectric tactile sensors using polyvinylidene fluoride (PVDF) have been developed to detect vibrations. Nevertheless, the development of such sensors with a simple structure and lower fabrication cost, continues to be a challenging task. The analysis on the effect of the thicknesses of soft body layers that attached to sensing elements on the slip sensor's performance has yet been discussed. In this project, a simple-structured and low-cost design of a flexible piezoelectric tactile sensor based on PVDF to estimate slip using robotic gripper is presented. The effect of different thicknesses of soft body layer made of silicone rubber and the sensor's performance in detecting slip is discussed. A PVDF-based sensor is attached to soft body layer that is incorporated into a robotic gripper. Experimental results demonstrate that sensor sensitivity increases with lower soft body layer thickness. Additionally, the sensor's signal amplitude increases with object load, indicating slip intensity. This advancement addresses challenges in fabricating simple structures and cost-effective piezoelectric sensors which enhance robotic gripper functionality in industrial applications.