低損失光波誘導のためのサブ波長直径のシリカ線
Limin Tong1, Rafael R Gattass, Jonathan B Ashcom
1Department of Physics and Division of Engineering and Applied Sciences, Harvard University, Cambridge, Massachusetts 02138, USA.
Nature
|December 20, 2003
まとめ
研究者は,低損失の光学波導体のために,サブ波長直径のシリカ線を開発しました. これらの原子滑らかで均一なワイヤは,シングルモード操作を可能にし,マイクロフォトニックデバイスに最適です.
科学分野:
- フォトニクス フォトニクスとは
- マテリアルサイエンス 材料科学
- 光学工学は,光学工学である.
背景:
- シリカ波導体は,光通信やセンサーにとって極めて重要です.
- 低損失,サブ波長-直径の波導体の製造は,表面の粗さと均一性の要件のために困難です.
研究 の 目的:
- 低損失光学波導体のサブ波長直径のシリカワイヤの製造について報告する.
- 可視線から近赤外線までのスペクトル範囲に適性を実証する.
主な方法:
- 自由に立つシリカワイヤーを作成するために,2段階の描画プロセスが採用されました.
- このプロセスは,原子レベルの表面の滑らさと均一性を持つ50nmまでの直径を達成しました.
主要な成果:
- 製造されたシリカワイヤーは,直径が50nmほど小さい.
- これらのワイヤは,原子レベルの表面の滑らかさと均一な直径を示しています.
- 低光学損失 (<0.1 dB mm−1) とシングルモード動作を達成しました.
- 光は,光学エヴァネッセンスのコップリングを通じてワイヤに結合することができます.
結論:
- 亜波長直径のシリカ線は,低損失の可動的な光学波導体です.
- これらのワイヤは,サブ波長構造を持つ将来のマイクロフォトニックデバイスのための有望な構成要素です.
関連する概念動画
Reducing Line Loss
530
In a three-phase circuit, line loss is an indicator of energy dissipated as heat due to the resistance of transmission lines. To address this, incorporating transformers into the system—a step-up transformer at the source and a step-down transformer at the load—is a strategic solution. Two three-phase transformers are introduced to improve this.
With a step-up transformer at the source, the voltage is increased, thereby reducing the current in the transmission lines since power loss...
With a step-up transformer at the source, the voltage is increased, thereby reducing the current in the transmission lines since power loss...
530
Boundary Conditions: Lossless Lines
486
Consider a single-phase, two-wire, lossless transmission line terminated by an impedance at the receiving end and a source with Thevenin voltage and impedance at the sending end. The line, with length, has a surge impedance and wave velocity determined by the line's inductance and capacitance.
At the receiving end, the boundary condition states that the voltage equals the product of the receiving-end impedance and current. This relationship is expressed as a function of the incident and...
At the receiving end, the boundary condition states that the voltage equals the product of the receiving-end impedance and current. This relationship is expressed as a function of the incident and...
486


