希釈された表面活性剤溶液からメソポラスニッケル水酸化物フィルムの電気化学的堆積
Yiwei Tan1, Shalini Srinivasan, Kyoung-Shin Choi
1Department of Chemistry, Purdue University, 560 Oval Drive, West Lafayette, Indiana 47907, USA.
Journal of the American Chemical Society
|March 10, 2005
まとめ
研究者らは,電気化学的堆積とナトリウムドデシル硫酸塩 (SDS) のようなテンプレート剤を使用して,メソポラスニッケル水酸化物フィルムを開発しました. SDS-ポリ ((アルキレン酸化物)) 複合体などの溶媒の組成とテンプレートの変化により,膜メソ構造の制御が可能になり,六角形またはラメラー形の相が生じました.
科学分野:
- 材料科学 材料科学とは
- 電気化学 電気化学について
- ナノテクノロジー ナノテクノロジー
背景:
- メソポラス材料は,様々な用途に適した高い表面積を提供します.
- ニッケル酸化水素は,バッテリーや超電容器の重要な材料です.
- 放電膜のメソ構造を制御することは,性能にとって極めて重要です.
研究 の 目的:
- ミセルテンプレートメソポラスニッケル水酸化物フィルムを準備する.
- テンプレート剤と溶媒の組成がフィルムメソ構造に及ぼす影響を調査する.
- 六角形およびラメラメソポラスNi(OH) 2フィルムの制御された合成を達成するために.
主な方法:
- ニッケル水酸化物フィルムの電気化学的堆積.
- 主なテンプレートとしてアニオンの表面活性剤であるドデシル硫酸ナトリウム (SDS) を利用する.
- ポリエチレン酸化物) -ポリエチレン酸化物) -ポリエチレン酸化物) -ポリエチレン酸化物) (PEO-PPO-PEO) コポリマーおよびポリエチレングリコール) のような共表面活性物質を使用します.
- プレッティング溶剤の組成,特にエチレングリコール濃度の変化.
主要な成果:
- ラメラーメソ構造のNi ((OH) 2) フィルムは,SDSのみを用いて得られた.
- 二次元の六角形メソポラスNi (OH) 2膜は,Ni2+,SDS,および共同表面活性物質の協同組立によって達成されました.
- 膜のメソ構造 (ミックスラメラーとシングルラメラー) は,エチレングリコール濃度に依存していた.
- 六角質のメソポラスフィルムは,濃縮されたエチレングリコール溶液中のSDS-ポリ (アルキレン酸化物) 複合体を用いて70°Cで得られた.
- 膜の形状と質は堆積の可能性に敏感でしたが,メソ構造は一貫していました.
結論:
- 電気化学的堆積は,調節可能なメソポラスニッケル水酸化物フィルムへの経路を提供します.
- テンプレートと溶媒の組成の選択は,メソストラクチャの形成を決定的に左右する.
- 協力的なテンプレート作成戦略により,特定の2D六角形のメソポラス構造が形成されます.
- この研究は,高度な材料アプリケーションのためのナノ構造の制御に関する洞察を提供します.
さらに関連する動画
関連する概念動画
Precipitation Reactions
In a precipitation reaction, aqueous solutions of soluble salts react to give an insoluble ionic compound – the precipitate. The reaction occurs when oppositely charged ions in solution overcome their attraction for water and bind to each other, forming a precipitate that separates out from the solution. Since such reactions involve the exchange of ions between ionic compounds in aqueous solution, they are also referred to as double displacement, double replacement, exchange reactions, or...
Factors Affecting Solubility
Compared with pure water, the solubility of an ionic compound is less in aqueous solutions containing a common ion (one also produced by dissolution of the ionic compound). This is an example of a phenomenon known as the common ion effect, which is a consequence of the law of mass action that may be explained using Le Chȃtelier’s principle. Consider the dissolution of silver iodide:
Qualitative Analysis
For solutions containing mixtures of different cations, the identity of each cation can be determined by qualitative analysis. This technique involves a series of selective precipitations with different chemical reagents, each reaction producing a characteristic precipitate for a specific group of cations. Metal ions within a group are further separated by varying the pH, heating the mixture to redissolve a precipitate, or adding other reagents to form complex ions.
For instance, group IV...
For instance, group IV...
Colloidal precipitates
The high insolubility of some precipitates can result in an unfavorable relative supersaturation. This can lead to colloidal particles with a large surface-to-mass ratio, where adsorption is promoted. For instance, in the precipitation of silver chloride, silver ions are adsorbed on the surface of the colloidal particles, forming a primary layer. This layer attracts ions of opposite charge (such as nitrate ions), forming a diffuse secondary layer of adsorbed ions. This electric double layer...
Washing, Drying, and Ignition of Precipitates
After filtration, the precipitate is washed to remove coprecipitated impurities and any remaining mother liquor. Colloidal precipitates, such as silver chloride, are washed with an electrolyte (such as dilute nitric acid) to prevent the peptization of the precipitate. In the case of slightly soluble precipitates, the wash solution contains a common ion to reduce solubility. Lead sulfate, which is slightly soluble in water, is washed with dilute sulfuric acid. Similarly, wash solutions may be...
Coagulation
Colloidal solids are solid particles suspended in solution. They are usually negatively charged, attracting a compact primary layer of positively charged ions, which attract more counterions to form an electrical double layer. Electrostatic repulsion between the charged double layers prevents the particles from colliding, stabilizing the colloids. These solids are often undesirable because they can contain toxins that are difficult to remove. Coagulation is a technique that helps aggregate and...


