高速道路雨水流出水処理・再利用における膜処理技術の応用
Izabela Anna Tałałaj1, Paweł Biedka2, Joanna Gwoździej-Mazur2
1Faculty of Civil Engineering and Environmental Science, Bialystok University of Technology, Wiejska 45A Street, Bialystok, 15-351, Poland. i.talalaj@pb.edu.pl.
Abstract:
In the presented study an application of membrane methods for treatment of rainwater runoff from expressway was examined. The possibility of reuse of obtained permeate was also analyzed. Ultrafiltration (UF), nanofiltration (NF), and reverse osmosis (RO) were employed to treat the rainwater that was taken from a rainwater reservoir on an expressway. The UF and NF process were carried out with activated carbon (AC) filter pretreatment. The effectiveness and efficiency of filtration processes were assessed by analyzing of permeate flux, electroconductivity concentrate factor, filtration time and removal rate for analyzed parameters. During rainwater treatment the most efficient method was AC-NF, where the average normalized flux value was 79% and was higher by 31% and 54% from RO and AC-UF, respectively. The highest efficiency in removing contaminants was achieved for AC-NF and RO. Average EC rejection rate was 99.6%, 42% and 2% respectively for RO, AC-NF, AC-UF. All methods had also good performance in bacteria removal (disinfection), although for microorganisms removal the efficiency over 90% was observed only for AC-NF and RO. The factor limiting the filtration process was membrane clogging, visible especially in AC-UF filtration. The results of the analysis of rainwater quality after using membrane processes indicate that permeate obtained from RO filtration could be used for economic purposes, such as flushing toilets, washing floors, and watering green areas.
関連する概念動画
Conservation of Mass in Moving, Nondeforming Control Volume
In the context of a detention basin, the conservation of mass states that the total mass of water entering the basin must equal the mass leaving the basin plus any accumulation of...
Design Example: Analyzing Capacity Contours for Flood Risk Assessment
Waterproofing and Anti-Bacterial Admixtures in Concrete
Waterproofing admixtures render concrete hydrophobic,...
Precipitation Processes
Design Example: Alignment of a Road Line Using GIS
Multiple Pipe Systems
Series Configuration
In a series configuration, fluid flows sequentially from one pipe...


