超音波-ギ酸前処理と金属イオン/深共晶溶媒の相乗触媒作用：バイオマスから5-ヒドロキシメチルフルフラールへの効率的な変換

This study developed a two-step conversion strategy for the efficient conversion of bamboo waste into 5-hydroxymethylfurfural (HMF). First, ultrasonic-assisted formic acid pretreatment was used at 80 °C for 3 h, removing approximately 83.7% of hemicellulose and 76.5% of lignin from the biomass, with a cellulose recovery of 93.5%. The ultrasonic step significantly enhanced the chemical action of formic acid through cavitation, allowing formic acid to penetrate deeper into the biomass, thereby more effectively removing hemicellulose and lignin. Subsequently, glucose was obtained through an enzymatic hydrolysis. In the second step of HMF preparation, citric acid in the hydrolysate was combined with ChCl to form an acidic deep eutectic solvent (DES), and metal chlorides were added as Lewis acid catalysts. Experiments results showed that when the ChCl-citric acid ratio was 2:1, and the Ca²⁺ concentration was 100 mM, an HMF yield of 51.9% was obtained at 220 °C for 1.5 h. This study provides an efficient, mild, and environmentally friendly method for the high-value valorization of waste bamboo.