通过现场光谱学揭示薄电解质金属阳极的设计原理
Huan Li1, Dongliang Chao1, Biao Chen1,2
1School of Chemical Engineering and Advanced Materials , The University of Adelaide , Adelaide , South Australia 5005 , Australia.
Journal of the American Chemical Society
|January 4, 2020
概括
设计用于实用电池的 (Li) 金属阳极需要在稀缺条件下解决电解质消耗问题. 这项研究表明,控制沉积和固体电解质界面 (SEI) 稳定性是防止电解质损失和实现稳定的循环的关键.
科学领域:
- 材料科学
- 电化学
- 能量储存
背景情况:
- 实际的 (Li) 金属电池需要在稀缺电解质条件下运行.
- 之前的研究通常假定过多的电解质,忽视了低电解质环境中的稳定性挑战.
- 宿主在稀疏电解质条件下的定向设计仍未得到充分研究.
研究的目的:
- 研究电解质消耗对金属阳极循环稳定性的影响.
- 了解在稀缺条件下核化/沉积和电解质消耗的机制.
- 提出一个设计原则,以减轻金属电池中的电解质损失.
主要方法:
- 在现场同步X射线衍射和拉曼光谱研究核/沉积.
- 在现场电化学阻抗光谱分析/电解质界面动力学.
- 核磁共振测量电解质消耗
- 支持实验发现的理论计算.
主要成果:
- 不均的核/沉积和固体电解质界面 (SEI) 层裂变显著增加了电解质消耗.
- 开发了一种3D低表面积缺陷石墨烯宿主 (L-DG),以控制的生长并稳定SEI层.
- 在低电解质负载10μL的情况下,L-DG主机实现了1.0 mAh cm-2的稳定循环.
结论:
- 电解质消耗是限制金属阳极循环稳定的关键因素.
- 同时控制结构不均性和SEI层裂对于精益电解质电池设计至关重要.
- 开发的L-DG主机展示了高度可逆的涂/剥离的可行策略,推进了实际的金属电池应用.
相关概念视频
Electrogravimetric Analysis: Overview
684
Electrogravimetric analysis measures the weight of an analyte deposited electrolytically onto a suitable working electrode. This method involves applying a potential to a pre-weighed electrode submerged in a solution, which results in the desired substance being deposited through reduction at the cathode or oxidation at the anode. The electrode's weight is recorded after deposition, and the difference in weight gives the analyte's weight in the solution.
To test the completeness of the...
To test the completeness of the...
684
Electrodeposition
1.2K
Electrodeposition is a technique used to separate an analyte from interferents by electrochemical processes. Here, the analyte is a metal ion that can be deposited on an electrode immersed in the sample solution. The electrochemical setup consists of an anode and a cathode. When an electric current is applied to the setup, oxidation occurs at the anode. At the cathode, which consists of a large metal surface, metal ions undergo reduction and deposit onto the surface.
Electrodeposition can...
Electrodeposition can...
1.2K
Electrolysis
29.9K
In a galvanic cell, the electrical work is done by a redox system on its surroundings as electrons produced by the spontaneous redox reactions are transferred through an external circuit. Alternatively, an external circuit does work on a redox system by imposing a voltage sufficient to drive an otherwise nonspontaneous reaction in a process known as electrolysis. For instance, recharging a battery involves the use of an external power source to drive the spontaneous (discharge) cell reaction in...
29.9K
Standard Electrode Potentials
49.5K
On comparing the reactivity of silver and lead, it is observed that the two ionic species, Ag+ (aq) and Pb2+ (aq), show a difference in their redox reactivity towards copper: the silver ion undergoes spontaneous reduction, while the lead ion does not. This relative redox activity can be easily quantified in electrochemical cells by a property called cell potential. This property is commonly known as cell voltage in electrochemistry, and it is a measure of the energy which accompanies the charge...
49.5K
Weak Acid Solutions
41.8K
Few compounds act as strong acids. A far greater number of compounds behave as weak acids and only partially react with water, leaving a large majority of dissolved molecules in their original form and generating a relatively small amount of hydronium ions. Weak acids are commonly encountered in nature, being the substances partly responsible for the tangy taste of citrus fruits, the stinging sensation of insect bites, and the unpleasant smells associated with body odor. A familiar example of a...
41.8K


