将物理选择与生物选择结合起来,以启动试点规模,连续流量,有氧颗粒污泥反应堆,而无需处理中断
Zhaohui An1, Jiefu Wang1, Xueyao Zhang1
1Department of Biological Systems Engineering, Virginia Tech, 1230 Washington St. SW, Blacksburg, VA 24061, USA.
Water research X
|June 19, 2023
概括
本研究提出了一种新方法,将废水处理厂转换为有氧颗粒污泥 (AGS) 系统. 通过优化澄清器运行,它可以防止污泥冲洗,并在启动过程中保持废水质量.
科学领域:
- 环境工程 环境工程
- 废水处理技术 废水处理技术
- 微生物生态学 微生物生态学
背景情况:
- 传统的活性污泥系统在过渡到连续流动,有氧颗粒污泥 (AGS) 设施时面临挑战.
- 关键的挑战包括由于花污泥冲洗而失去处理能力,以及在AGS反应堆启动期间潜在的化故障.
- 目前对AGS的物理选择器设计有限,通常需要复杂的测序批量反应堆或侧流旋.
研究的目的:
- 为了克服技术限制,全面的活性污泥基础设施向连续流动,有氧颗粒污泥 (AGS) 设施过渡.
- 提出一种新的,经济的方法,在现有处理列车内实施连续流动AGS.
- 在AGS反应堆启动期间保护废水质量.
主要方法:
- 利用真实的废水数据来评估运营调整.
- 作为物理选择器,将上游澄清器的表面溢出率 (SOR) 提高到10 m/h.
- 将物理选择器下流和溢流污泥重定向到处理列车内的特定区域.
主要成果:
- 优化的上游澄清器有效地从AGS中分离了花性污泥.
- 拟议的污泥重定向战略促进了AGS的形成.
- 在整个AGS反应堆启动期间,废水质量得到维持,减轻了化损失.
结论:
- 在高SOR下运行的上流澄清器可以作为AGS系统的有效物理选择器.
- 这种方法为升级现有废水处理厂以连续流AGS提供了一种可行和经济的方法.
- 这项研究展示了用于无集成AGS技术的实际解决方案,提高了处理效率和稳定性.
相关概念视频
Bioreactor Design and Operational System
Bioreactors are engineered vessels designed to cultivate microorganisms under controlled conditions for industrial bioprocessing. They maintain sterility and allow precise regulation of pH, temperature, oxygen, and nutrient levels to optimize microbial growth and metabolite production. Bioreactors range from small laboratory units of 1 liter to industrial systems holding up to 500,000 liters, though only about 75% of their volume is actively used for fermentation. The remaining headspace...
Bioreactor Controls-II
In aerobic fermentations, oxygen is vital for microbial growth and metabolite production. Since air comprises only about 20% oxygen and the gas is poorly soluble in water—just 9 ppm at 20°C—supplying sufficient oxygen becomes a critical challenge, especially in high-demand processes like yeast growth or citric acid production. Even a fully saturated broth may offer only a few seconds of oxygen availability.To address this, sterile or scrubbed air is introduced into the fermentor via a sparger...
Bioreactor Controls-III
Strain improvement is a foundational strategy in industrial microbiology aimed at maximizing microbial productivity, particularly because natural isolates typically yield commercially valuable products in very low concentrations. Although optimizing the culture medium and environmental conditions can improve yields, these adjustments are inherently limited by the organism’s genetic potential. As a result, the focus shifts toward genetic modifications to enhance biosynthetic capacity. The...
Scale-Up Processes
The scale-up of microbial fermentation processes is essential in industrial biotechnology, allowing the transition from laboratory-scale experiments to commercial-scale production while aiming to maintain product yield and quality. This process requires meticulous adjustment of equipment design, process parameters, and contamination control strategies to accommodate increasing culture volumes.At the laboratory scale, cultures are typically maintained in 1 to 10-liter glass or autoclavable...
Upstream Processing
Upstream processing represents a critical phase in biomanufacturing, wherein biological systems such as microorganisms, mammalian cells, or insect cells are cultivated to produce therapeutic proteins, vaccines, enzymes, or other biologically derived products. This phase encompasses all steps from the selection and genetic manipulation of the production organism to the cultivation of cells in bioreactors under tightly controlled environmental conditions.Host Selection and Genetic OptimizationThe...
Biological Treatment of Effluent and Waste Water
Biological wastewater treatment relies on the metabolic activity of microorganisms to remove pollutants from sewage. In modern treatment systems, this process is organized into sequential stages that progressively reduce solid material, dissolved organic matter, and microbial contamination. Each stage plays a distinct role in improving water quality and preparing the effluent for safe discharge or reuse.Primary and Secondary TreatmentPrimary treatment is a physical process that removes large...


