相关实验视频
Updated: Jul 23, 2025

07:36
Experimental Procedure for Warm Spinning of Cast Aluminum Components
Published on: February 1, 2017
9.5K
一种新的方法来研究含合金的过热颗粒精炼过程,使用快速固化过程
Sungsu Jung1,2, Yongho Park2, Youngcheol Lee1
1Energy Component & Material R&BD Group, Korea Institute of Industrial Technology, Busan 46938, Republic of Korea.
Materials (Basel, Switzerland)
|July 14, 2023
概括
过热含的合金可以在没有添加剂的情况下改进谷物结构. 新的研究表明,在超热过程中形成的Al10Mn3粒子作为核子,解释了AZ91合金中这种独特的粒度提炼机制.
科学领域:
- 材料科学 材料科学 材料科学
- 金工业是金工业的一个方面.
- 造技术 造技术 造技术
背景情况:
- 超热是一种独特的谷物精炼方法,用于含的合金.
- 过热诱导的谷物精炼的确切机制尚不清楚.
- 现有的方法通常依赖于添加核化剂或精炼剂.
研究的目的:
- 用超热过程研究含的合金中的颗粒精炼机制.
- 阐明特定的Al-Mn粒子在超热现象中的作用.
- 了解潜在核子和矩阵之间的结晶学关系.
主要方法:
- 使用AZ91合金,这是一个代表性的-合金.
- 采用快速固化工艺,在超热过程中精确控制温度.
- 使用扫描传输电子显微镜 (STEM) 分析了粒子形成和晶体学连贯性.
主要成果:
- 在非超热样本中发现了Al8Mn5颗粒,在超热AZ91样本中发现了Al10Mn3颗粒.
- 观察到Al8Mn5和之间的结晶学连贯性较差.
- 在Al10Mn3粒子和之间发现了更好的结晶学连贯性.
结论:
- 过热会在AZ91合金中产生Al10Mn3颗粒.
- Al10Mn3颗粒与具有良好的结晶学连贯性.
- 这些Al10Mn3颗粒被认为是AZ91合金中超热诱导的谷物精炼的主要核素.
相关概念视频
Recrystallization: Solid–Solution Equilibria
1.1K
Recrystallization is a purification technique used to separate impurities from solid compounds. In this technique, no chemical reactions occur. Instead, it exploits physical properties only, specifically, the solubility differences between the desired compound and impurities, either at a single temperature or at different temperatures, and under other selected conditions. The solid-solution equilibrium (solubility equilibrium) of each component in the solution represents a binary phase...
1.1K
Precipitation Processes
490
The experimental conditions in a gravimetric analysis should be optimized to maximize the particle size and purity of the obtained precipitate. Ideally, the concentration of the precipitating reagent should be low with effective stirring to maintain low relative supersaturation for the growth of large crystals. In homogeneous precipitation, the precipitant is slowly generated by a chemical reaction in the solution to avoid local reagent excesses. For example, urea decomposes gradually to...
490

