高分子量聚合物链的低强度混合过程导致长网链的弹性体和高疲劳值
Xianyang Bao1,2, Guodong Nian1, Yakov Kutsovsky3
1John A. Paulson School of Engineering and Applied Sciences, Harvard University, Cambridge, MA 02138, USA. suo@seas.harvard.edu.
Soft matter
|July 25, 2023
概括
强烈的混合缩短了聚合物链,降低了疲劳阻力. 低强度和回火可以保持长链,显著提高聚丁网的疲劳值.
科学领域:
- 材料科学 材料科学 材料科学
- 聚合物化学 聚合物化学
背景情况:
- 聚合物网络通常是通过交联聚合物链形成的.
- 传统的混合方法,如内部混合机和轮机,诱导链裂,导致更短的聚合物链.
研究的目的:
- 研究加工强度对聚合物网络结构和疲劳性质的影响.
- 开发一种提高弹性体疲劳值的方法.
主要方法:
- 使用一种低强度的工艺,结合和回火.
- 通过受控的交叉连接来准备聚乙烯网络.
主要成果:
- 低强度加工保留了长长的聚合物链,与高强度方法不同.
- 与传统处理网络 (∼100 J m-2) 相比,由此产生的聚丁网表现出明显增加的疲劳值 (440 J m-2).
- 长链的保存导致每个链的交叉链接更多,链条更长,悬挂链条的比例更低,所有这些都促进了更高的疲劳抵抗力.
结论:
- 低强度加工对于保持聚合物链完整性至关重要.
- 这种方法可以创建具有卓越机械性能的耐疲劳弹性体.
- 这些发现为设计具有更高耐久性的先进材料提供了一条途径.
相关概念视频
Polymer Classification: Architecture
2.8K
Polymers are classified as linear or branched on the basis of their chain architecture. The polymer chains in linear polymers have a long chain-like structure with minimal to no branching at all. Even if a polymer features large substituent groups on the monomer, which appear as branches to the skeleton, it is not considered a branched polymer. A branched polymer contains secondary polymer chains that arise from the main polymer chain. The branching occurs when the polymer growth shifts from...
2.8K
Molecular Weight of Step-Growth Polymers
2.2K
Step growth polymerization involves bi or multifunctional monomers. Bifunctional monomers react to form linear step growth polymers, whereas multifunctional monomers react to form non-linear or branched polymers.
As the step-growth polymerization involves step-wise condensation of monomers, the molecular weight also builds up eventually. Consequently, high molecular weight polymers are obtained at the late stages of the polymerization, where 99% of monomers have been consumed.
The extent of the...
As the step-growth polymerization involves step-wise condensation of monomers, the molecular weight also builds up eventually. Consequently, high molecular weight polymers are obtained at the late stages of the polymerization, where 99% of monomers have been consumed.
The extent of the...
2.2K
Ziegler–Natta Chain-Growth Polymerization: Overview
3.4K
Ziegler–Natta polymerization is another form of addition or chain‐growth polymerization used for synthesizing linear polymers over branched polymers. The catalyst used for polymerization is the Ziegler–Natta catalyst, named after Karl Ziegler and Giulio Natta, who developed it in 1953. This catalyst is an organometallic complex of titanium tetrachloride and triethyl aluminum, with the active form of the catalyst being an alkyl titanium compound. Using the Ziegler–Natta...
3.4K
Step-Growth Polymerization: Overview
3.5K
Step-growth or condensation polymerization is a stepwise reaction of bi or multifunctional monomers to form long-chain polymers. As all the monomers are reactive, most of the monomers are consumed at the early stages of the reaction to form small chains of reactive oligomers, which then combine to form long polymer chains in the late stages. Hence, the reaction has to proceed for a long time to achieve high molecular weight polymers.
Many natural and synthetic polymers are produced by...
Many natural and synthetic polymers are produced by...
3.5K
Polymer Classification: Crystallinity
2.9K
Unlike ionic or small covalent molecules, polymers do not form crystalline solids due to the diffusion limitations of their long-chain structures. However, polymers contain microscopic crystalline domains separated by amorphous domains.
Crystalline domains are the regions where polymer chains are aligned in an orderly manner and held together in proximity by intermolecular forces. For example, chains in the crystalline domains of polyethylene and nylon are bound together by van der Waals...
Crystalline domains are the regions where polymer chains are aligned in an orderly manner and held together in proximity by intermolecular forces. For example, chains in the crystalline domains of polyethylene and nylon are bound together by van der Waals...
2.9K
Olefin Metathesis Polymerization: Overview
2.2K
Recently, the development of olefin metathesis polymerization advanced the field of polymer synthesis. Simply put, the reorganization of substituents on their double bonds between two olefins in the presence of a catalyst is known as the olefin metathesis reaction. The use of metathesis reaction for polymer synthesis is called olefin metathesis polymerization.
Ruthenium-based Grubbs catalyst is the most commonly used catalyst for olefin metathesis polymerization. Grubbs catalyst consists...
Ruthenium-based Grubbs catalyst is the most commonly used catalyst for olefin metathesis polymerization. Grubbs catalyst consists...
2.2K


