相关实验视频

Updated: Jul 19, 2025

Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent
11:14

Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent

Published on: February 21, 2017

12.4K

从半焦炭中清洁地制备成型焦炭,采用碳化凝固工艺

Zhengqi Guo1, Xianqing Xu1, Deqing Zhu1

  • 1School of Mineral Processing and Bioengineering, Central South University, Changsha 410083, Hunan, China.

ACS omega
|August 7, 2023
PubMed
概括

这项研究从低级煤半焦炭中开发了高质量的成型焦炭,显著减少了SO2,NOx和颗粒物排放,以获得更清洁的能源. 优化的工艺提高了热效率和环境效益.

更多相关视频

A Uniaxial Compression Experiment with CO2-Bearing Coal Using a Visualized and Constant-Volume Gas-Solid Coupling Test System10:27

A Uniaxial Compression Experiment with CO2-Bearing Coal Using a Visualized and Constant-Volume Gas-Solid Coupling Test System

Published on: June 12, 2019

8.7K
Laboratory Production of Biofuels and Biochemicals from a Rapeseed Oil through Catalytic Cracking Conversion11:33

Laboratory Production of Biofuels and Biochemicals from a Rapeseed Oil through Catalytic Cracking Conversion

Published on: September 2, 2016

13.9K

相关概念视频

Washing, Drying, and Ignition of Precipitates00:52

Washing, Drying, and Ignition of Precipitates

After filtration, the precipitate is washed to remove coprecipitated impurities and any remaining mother liquor. Colloidal precipitates, such as silver chloride, are washed with an electrolyte (such as dilute nitric acid) to prevent the peptization of the precipitate. In the case of slightly soluble precipitates, the wash solution contains a common ion to reduce solubility. Lead sulfate, which is slightly soluble in water, is washed with dilute sulfuric acid. Similarly, wash solutions may be...
951
Sample Preparation for Analysis: Advanced Techniques01:08

Sample Preparation for Analysis: Advanced Techniques

Accurate analysis of complex samples often requires advanced preparation techniques to achieve reliable and reproducible results. Samples containing inorganic or organic materials can be challenging to dissolve or decompose effectively. Standard sample preparation methods include acid digestion, fusion, dry ashing, and wet digestion.
Acid digestion with strong acids is commonly used to dissolve inorganic materials that are insoluble (do not dissolve) in water. This method can be useful for...
391
Turbulent Flow: Problem Solving01:09

Turbulent Flow: Problem Solving

Carbonation is a process used to dissolve carbon dioxide gas in a liquid, commonly used in the production of carbonated beverages. Achieving efficient carbonation requires careful control of temperature, pressure, and flow conditions. By adjusting these parameters, carbonation efficiency can be maximized, producing a higher concentration of CO2 in the liquid.
Temperature is a key factor in CO2 solubility. In this case, the CO2 gas and the liquid are cooled to 20°C. Lower temperatures...
159
Preparation of Carboxylic Acids: Overview01:31

Preparation of Carboxylic Acids: Overview

There are various methods for the preparation of carboxylic acids. For example, oxidation of primary alcohols or aldehydes using strong oxidizing agents results in a carboxylic acid.  Aldehydes can also be oxidized in the presence of mild oxidizing agents.
2.6K
Carbonation Shrinkage01:24

Carbonation Shrinkage

Atmospheric CO2 penetrates the concrete's pores and, in the presence of moisture, forms carbonic acid, which then reacts with calcium hydroxide in the hydrated cement, forming calcium carbonate. This process reduces the concrete's volume and is termed carbonation shrinkage.
The concrete's permeability is slightly reduced as calcium carbonate produced during the reaction fills its pores. Furthermore, its strength is slightly enhanced as the water released during the reaction...
165
Loss of Carboxy Group as CO2: Decarboxylation of β-Ketoacids01:02

Loss of Carboxy Group as CO2: Decarboxylation of β-Ketoacids

Carboxylic acids, upon heating, undergo a decarboxylation reaction by releasing carbon dioxide gas. Monocarboxylic acids do not undergo decarboxylation easily. However, a silver salt of carboxylic acid reacts with bromine or iodine under high temperature to release carbon dioxide gas and forms halide with one less carbon. This reaction is called the Hunsdiecker reaction.
3.2K