在干燥状态下和在洗过程中,棉花和棉花聚织物中的颗粒散射
Tanja Pušić1, Branka Vojnović1, Sandra Flinčec Grgac1
1Faculty of Textile Technology, University of Zagreb, 10000 Zagreb, Croatia.
Polymers
|August 12, 2023
概括
棉花和棉花聚织物被洗了50个循环,以评估性能变化和颗粒释放. 棉织物比混合物更容易降解并释放出更多的微塑料,特别是在重复洗后.
科学领域:
- 织科学 织科学
- 材料科学 材料科学 材料科学
- 环境科学 环境科学
背景情况:
- 织品的耐用性和微塑料的释放是洗衣机的关键问题.
- 了解织物组成对磨损和环境影响的影响至关重要.
研究的目的:
- 调查多个洗周期对棉花和棉花聚混合织物的影响.
- 量化织物属性变化和微塑料颗粒生成.
- 用层次集群分析分析废水特性和织物磨损.
主要方法:
- 清洗 3,10,50 个循环的棉花和棉花聚织物.
- 测量拉伸性能 (/织物),厚度和干燥颗粒的产生.
- 分析废水总悬浮固体 (TSS),总固体 (TS),pH和导电性.
- 采用等级集群分析 (HCA) 来查看属性和周期相似性.
主要成果:
- 棉织物在50次洗后,与混合物 (30.9%) 相比,形方向磨损 (41.2%) 较大.
- 与混合物相比,棉花在所有大小类别中释放的微塑料颗粒明显更多.
- 层次集群分析表明,结构性质主导着早期的洗周期,而协同效应则在以后占主导地位.
结论:
- 织物成分显著影响洗过程中的耐用性和微塑料脱落.
- 棉花比棉花聚混合物更容易磨损,并释放出更多的颗粒.
- 洗参数与织物结构相互作用,影响着随着时间的推移的磨损和颗粒释放.
相关概念视频
Types of Step-Growth Polymers: Polyesters
2.3K
The introduction of polyesters has brought major development to the textile industry. The wrinkle-free behavior of polyester blends has eliminated the need for starching and ironing clothes.
Polyesters are commonly prepared from terephthalic acid and ethylene glycol; the crude product is known as poly(ethylene terephthalate) or PET. However, polyesters are synthesized industrially by transesterification of dimethyl terephthalate with ethylene glycol at 150 °C. The two reactants and the...
Polyesters are commonly prepared from terephthalic acid and ethylene glycol; the crude product is known as poly(ethylene terephthalate) or PET. However, polyesters are synthesized industrially by transesterification of dimethyl terephthalate with ethylene glycol at 150 °C. The two reactants and the...
2.3K
Drying Shrinkage
102
When hardened concrete is exposed to air with a relative humidity of less than 100 percent, it begins to lose the free water within its capillaries. As this water evaporates, the water initially adsorbed onto the calcium silicate hydrates migrates towards these now empty spaces and eventually evaporates as well. Over time, as more water leaves, the volume of the concrete decreases, a phenomenon known as drying shrinkage.
A portion of this drying shrinkage can be reversed; if the concrete is...
A portion of this drying shrinkage can be reversed; if the concrete is...
102
Washing, Drying, and Ignition of Precipitates
951
After filtration, the precipitate is washed to remove coprecipitated impurities and any remaining mother liquor. Colloidal precipitates, such as silver chloride, are washed with an electrolyte (such as dilute nitric acid) to prevent the peptization of the precipitate. In the case of slightly soluble precipitates, the wash solution contains a common ion to reduce solubility. Lead sulfate, which is slightly soluble in water, is washed with dilute sulfuric acid. Similarly, wash solutions may be...
951
Characteristics of Dry Friction
615
Dry friction occurs when two solid surfaces slide against each other without any lubrication or fluid present. It causes resistance when pushing objects along a surface, like a gardener pushing a wheelbarrow. The force applied to move the cart causes dry friction between the wheel and the ground.
Before the wheelbarrow starts moving, the static frictional force acts tangentially to the contact surface, opposing the force that is about to induce the motion. This frictional force prevents the...
Before the wheelbarrow starts moving, the static frictional force acts tangentially to the contact surface, opposing the force that is about to induce the motion. This frictional force prevents the...
615


