相关实验视频

Updated: Jun 26, 2026

Calcium Carbonate Formation in the Presence of Biopolymeric Additives
09:31

Calcium Carbonate Formation in the Presence of Biopolymeric Additives

Published on: May 14, 2019

16.8K

一个强大的三电冲击传感器与二氧化碳前体的碳酸基碳酸盐层,用于鞭打比赛应用

Inkyum Kim1,2, Hyunwoo Cho1,2, Narasimharao Kitchamsetti2,3

  • 1Department of Electronics and Information Convergence Engineering, Kyung Hee University, 1732 Deogyeong-daero, Giheung-gu, Yongin 17104, Republic of Korea.

Micromachines
|September 28, 2023
PubMed
概括

这项研究引入了一个自动供电的冲击传感器,使用带有碳酸 (CaCO3) 层的 triboelectric 纳米发电机. 这种环保设备提供了强大的冲击传感和碳捕获潜力.

关键词:
吸收二氧化碳的吸收方式碳酸的碳酸是一种碳酸.环保技术是环保的技术击匹配的比赛是击比赛.triboelectric纳米发电机的使用情况带电电序列是三电电序列.

更多相关视频

Sensitivity Enhancement of Soft Capacitive Pressure Sensors Using a Solvent Evaporation-Based Porosity Control Technique10:28

Sensitivity Enhancement of Soft Capacitive Pressure Sensors Using a Solvent Evaporation-Based Porosity Control Technique

Published on: March 24, 2023

1.1K
Author Spotlight: Microfluidic Channel-Based Soft Electrodes and Their Application in Capacitive Pressure Sensing05:57

Author Spotlight: Microfluidic Channel-Based Soft Electrodes and Their Application in Capacitive Pressure Sensing

Published on: March 17, 2023

2.2K

相关概念视频

Capacitor With A Dielectric01:18

Capacitor With A Dielectric

Parallel plate capacitors consist of two conducting plates separated by a certain distance. However, it is mechanically difficult to hold the large plates parallel to each other without actual contact. Hence, a dielectric layer is commonly placed between the plates, which provides an easy solution for holding the plates together with a small gap and increases the capacitance of the capacitor.
Dielectrics are non-conducting materials with no free or loosely bound electrons. When a dielectric is...
Electrodeposition01:08

Electrodeposition

Electrodeposition is a technique used to separate an analyte from interferents by electrochemical processes. Here, the analyte is a metal ion that can be deposited on an electrode immersed in the sample solution. The electrochemical setup consists of an anode and a cathode. When an electric current is applied to the setup, oxidation occurs at the anode. At the cathode, which consists of a large metal surface, metal ions undergo reduction and deposit onto the surface.
Electrodeposition can...