开放酸溶解-氨溶液提取-ICP OES在土壤中快速确定7种微量金属元素
Jiahan Wang1, Junqiao Long1, Feng Yang1
1Haikou Marine Geological Survey Center of China Geological Survey, Haikou, 571127, China.
PloS one
|October 10, 2023
概括
这项研究提出了一种改进的土壤样本酸消化方法,在ICP OES分析中最大限度地减少酸腐蚀. 新技术提高了预处理效率,用于分析土壤中的多种元素.
科学领域:
- 分析化学 分析化学
- 环境科学 环境科学
背景情况:
- 酸 (HF) 在土壤样本酸溶解过程中对ICP OES注射系统构成腐蚀挑战.
- 传统的开放消化方法通常需要完全去除HF,使预处理过程复杂化.
研究的目的:
- 在ICP OES分析中开发一种改进的酸消化方法,克服高频腐蚀问题.
- 为了提高土壤样本预处理的效率,用于多元元素的确定.
主要方法:
- 采用了一种改进的开放消化技术,允许部分保留HF.
- 样品用混合酸 (3毫升HNO3+5毫升HF) 消化,然后用0.5%的氧化溶液中和.
- 使用土壤标准和工艺空白的两点标准曲线被用来减轻矩阵效应.
主要成果:
- 该方法成功确定了七种元素:V,Cr,Co,Ni,Cu,Zn和Pb,具有较低的量化极限和良好的精度.
- 方法量化极限范围从0.261μggg-1 (Ni) 到4.32μggg-1 (Cr) 之间.
- 对国家标准材料的分析显示,测量值和认证值之间有很好的一致性,验证了该方法的准确性.
结论:
- 改进的方法有效地解决了ICP OES分析土壤样本中的HF腐蚀.
- 这种技术为分析大量土壤样本多种微量元素提供了更有效和可行的方法.
- 该方法特别适用于常规分析和高通量实验室.
相关概念视频
Precipitation and Co-precipitation
1.8K
Precipitation and coprecipitation methods can be used to separate a mixture of ions in a solution. In qualitative inorganic analysis, ions that form sparingly soluble precipitates with the same reagent are separated based on the differences in solubility products. For example, consider the separation of Cu(II) and Fe(II) ions by precipitation as insoluble sulfides. First, copper(II) sulfide is precipitated by the addition of acidic H2S, where the dissociation of H2S is suppressed. Adding H2S...
1.8K
Sample Preparation for Analysis: Advanced Techniques
378
Accurate analysis of complex samples often requires advanced preparation techniques to achieve reliable and reproducible results. Samples containing inorganic or organic materials can be challenging to dissolve or decompose effectively. Standard sample preparation methods include acid digestion, fusion, dry ashing, and wet digestion.
Acid digestion with strong acids is commonly used to dissolve inorganic materials that are insoluble (do not dissolve) in water. This method can be useful for...
Acid digestion with strong acids is commonly used to dissolve inorganic materials that are insoluble (do not dissolve) in water. This method can be useful for...
378
Atomic Absorption Spectroscopy: Lab
464
For AAS measurements, samples must be introduced as clear solutions, often requiring extensive preliminary treatment to dissolve materials like soils, animal tissues, and minerals. Common methods for sample preparation include treatment with hot mineral acids, wet ashing, combustion in closed containers, high-temperature ashing, or fusion with reagents.
Solutions containing organic solvents, such as low-molecular-mass alcohols, esters, or ketones, enhance absorbances by increasing...
Solutions containing organic solvents, such as low-molecular-mass alcohols, esters, or ketones, enhance absorbances by increasing...
464
Atomic Emission Spectroscopy: Lab
179
AES is a powerful analytical technique, especially effective when used with plasma sources, producing abundant spectra in characteristic emission lines. The Inductively Coupled Plasma (ICP), in particular, yields superior quantitative analytical data due to its high stability, low noise, low background, and minimal interferences under optimal experimental conditions. However, newer air-operated microwave sources are emerging as promising alternatives that could be more cost-effective than...
179
Inductively Coupled Plasma-Mass Spectrometry (ICP-MS): Interferences
498
Inductively coupled plasma–mass spectrometry (ICP–MS) is a highly selective and sensitive technique for accurate elemental analysis. Though the analysis of ICP–MS mass spectra is comparatively straightforward, it is affected by spectroscopic and non-spectroscopic interferences. Spectroscopic interferences arise when the plasma contains ionic species with an m/z value the same as the analyte ion. Spectroscopic interference can be categorized as isobaric, polyatomic ions, and...
498
Extraction: Advanced Methods
466
Metal ions can be separated from one another by complexation with organic ligands–the chelating agent– to form uncharged chelates. Here, the chelating agent must contain hydrophobic groups and behave as a weak acid, losing a proton to bind with the metal. Since most organic ligands used in this process are insoluble or undergo oxidation in the aqueous phase, the chelating agent is initially added to the organic phase and extracted into the aqueous phase. The metal-ligand complex is...
466


