相关实验视频
Updated: Jul 13, 2025

07:21
Twin-Screw Extrusion Process to Produce Renewable Fiberboards
Published on: January 27, 2021
6.5K
使用聚乙烯的单螺丝挤出工艺的研究
1Plastics Processing Department, Faculty of Mechanical and Industrial Engineering, Warsaw University of Technology, 85 Narbutta Street, 02-524 Warsaw, Poland.
Polymers
|October 14, 2023
概括
这项研究评估了生物降解塑料聚酸 (PLA) 的挤出,使用单螺丝挤出机. 工艺参数,如螺丝速度和温度变化,以分析PLA.
科学领域:
- 聚合物科学与工程 聚合物科学与工程
- 材料加工 材料加工
背景情况:
- 聚酸 (PLA) 是一种可生物降解的塑料,其密度高于传统的多聚烯.
- 在挤出中常用的塑料包括聚乙烯和聚烯.
- 了解PLA挤出对于可持续塑料制造至关重要.
研究的目的:
- 评估聚乙烯 (PLA) 的单螺丝挤出工艺.
- 分析不同挤出机操作参数对PLA挤出的影响.
- 为了研究螺丝旋转速度,温度和挤出输出之间的关系.
主要方法:
- 使用单螺杆挤出机进行聚酸 (PLA) 处理.
- 系统地改变了螺丝旋转速度和工艺温度.
- 监控的关键挤出参数:温度,功率,电流,压力和质量流量.
主要成果:
- 记录温度,功耗,电流强度,压力和挤出质量的变化.
- 为每个特定的螺杆旋转速度设置收集的数据.
- 确定了操作参数和挤出结果之间的相关性.
结论:
- 这项研究提供了有关PLA挤出特性的宝贵数据.
- 这些发现为使用单螺丝挤出机的PLA提供了最佳加工条件.
- 这项研究有助于生物降解塑料加工技术的进步.
相关概念视频
Types of Step-Growth Polymers: Polyesters
2.3K
The introduction of polyesters has brought major development to the textile industry. The wrinkle-free behavior of polyester blends has eliminated the need for starching and ironing clothes.
Polyesters are commonly prepared from terephthalic acid and ethylene glycol; the crude product is known as poly(ethylene terephthalate) or PET. However, polyesters are synthesized industrially by transesterification of dimethyl terephthalate with ethylene glycol at 150 °C. The two reactants and the...
Polyesters are commonly prepared from terephthalic acid and ethylene glycol; the crude product is known as poly(ethylene terephthalate) or PET. However, polyesters are synthesized industrially by transesterification of dimethyl terephthalate with ethylene glycol at 150 °C. The two reactants and the...
2.3K
Step-Growth Polymerization: Overview
3.5K
Step-growth or condensation polymerization is a stepwise reaction of bi or multifunctional monomers to form long-chain polymers. As all the monomers are reactive, most of the monomers are consumed at the early stages of the reaction to form small chains of reactive oligomers, which then combine to form long polymer chains in the late stages. Hence, the reaction has to proceed for a long time to achieve high molecular weight polymers.
Many natural and synthetic polymers are produced by...
Many natural and synthetic polymers are produced by...
3.5K
Ziegler–Natta Chain-Growth Polymerization: Overview
3.3K
Ziegler–Natta polymerization is another form of addition or chain‐growth polymerization used for synthesizing linear polymers over branched polymers. The catalyst used for polymerization is the Ziegler–Natta catalyst, named after Karl Ziegler and Giulio Natta, who developed it in 1953. This catalyst is an organometallic complex of titanium tetrachloride and triethyl aluminum, with the active form of the catalyst being an alkyl titanium compound. Using the Ziegler–Natta...
3.3K

