通过水解和选择性气相化/脱,将废轮胎转化为p-cymene
Jiang Wu1, Zhukun Zhang1, Dongxian Li1
1Jiangsu Co-Innovation Center for Efficient Processing and Utilization of Forest Resources, International Innovation Center for Forest Chemicals and Materials, College of Chemical Engineering, Nanjing Forestry University, Longpan Road 159, Nanjing 210037, China; Jiangsu Province Key Laboratory of Biomass Energy and Materials, Institute of Chemical Industry of Forest Products, Chinese Academy of Forestry (CAF), No. 16, Suojin Five Village, Nanjing 210042, China.
废轮胎 (WT) 可以通过两阶段的催化过程转化为有价值的p-cymene. 这种方法优化了水解和水处理条件,以有效利用资源和减少污染.
科学领域:
- 化学工程是化学工程的重要组成部分.
- 环境科学 环境科学
- 催化剂是一种催化剂.
背景情况:
- 废轮胎 (WT) 带来了重大的环境挑战.
- 资源利用和WT的价值化对可持续性至关重要.
- 从WT开发高价值产品可以减少污染.
研究的目的:
- 提出一种催化级联工艺,将WT转化为高价值的p-cymene.
- 为了研究不同酸性支持物对烯化/脱的作用.
- 优化工艺参数以最大限度地提高p-cymene产量.
主要方法:
- 一个两级固定床反应堆,结合了水解和催化气相水处理.
- 研究了三种不同的酸性化/脱支持剂的催化剂.
- 优化了水溶解温度,化温度和催化剂与原料的比率 (C/F).
主要成果:
- 烯是没有催化剂的WT脱聚化的主要产物.
- 在优化的条件下 (425°C水解,400°C水处理, 10:1 C/F,0.15 MPa) 产生了79.1%的p-cymene.
- Pd/SBA-15催化剂获得了最高的p-cymene含量.
结论:
- 拟议的催化级联过程有效地将WT转化为p-cymene.
- 优化的工艺参数和Pd/SBA-15催化剂是高产量的关键.
- 这种方法为废旧轮胎的价值化和p-cymene生产提供了一个可持续的途径.
更多相关视频
09:21Tuning the Acidity of Pt/ CNTs Catalysts for Hydrodeoxygenation of Diphenyl Ether
Published on: August 17, 2019
12:08Catalytic Reactions at Amine-Stabilized and Ligand-Free Platinum Nanoparticles Supported on Titania During Hydrogenation of Alkenes and Aldehydes
Published on: June 24, 2022
相关概念视频
Reduction of Benzene to Cyclohexane: Catalytic Hydrogenation
Reduction of Alkenes: Catalytic Hydrogenation
Metals like palladium, platinum, and nickel are commonly used in their solid forms — fine powder on an inert surface. As these catalysts remain insoluble in the reaction mixture, they are referred to as heterogeneous catalysts.
The hydrogenation process takes place on the...
Reduction of Alkynes to cis-Alkenes: Catalytic Hydrogenation
Like alkenes, alkynes can be reduced to alkanes in the presence of transition metal catalysts such as Pt, Pd, or Ni. The reaction involves two sequential syn additions of hydrogen via a cis-alkene intermediate.
Reduction of Alkenes: Asymmetric Catalytic Hydrogenation
The metal catalyst used can be either heterogeneous or homogeneous. When hydrogenation of an alkene generates a chiral center, a pair of enantiomeric products is expected to form. However, an enantiomeric excess of one of the products can be facilitated using an enantioselective reaction or an...
Benzene to Phenol via Cumene: Hock Process
Thermal Electrocyclic Reactions: Stereochemistry
Selection Rules: Thermal Activation
Conjugated systems containing an even number of π-electron pairs undergo a conrotatory ring closure. For example, thermal electrocyclization of (2E,4E)-2,4-hexadiene, a conjugated diene containing two π-electron pairs, gives trans-3,4-dimethylcyclobutene.
