在长波红外区域设计超材料的完美吸收器
Yang Wang1, Xiu Li2, Shenbing Wu1
1School of Electronic Engineering, Huainan Normal University, Huainan 232000, China.
Physical chemistry chemical physics : PCCP
|December 12, 2023
概括
研究人员开发了一个窄带元材料吸收器和一个超宽带元材料完美吸收器. 这些超材料吸收器在长红外波长频段显示出高吸收率,适用于传感和能源应用.
科学领域:
- 超材料是指一种超材料.
- 纳米光子学 纳米光子学
- 红外光学 红外光学 红外光学
背景情况:
- 超材料吸收器提供可调节的电磁性质.
- 实现高效率的超宽带吸收仍然是一个挑战.
研究的目的:
- 设计和分析一个窄带元材料吸收器 (NMA) 和一个超宽带元材料完美吸收器 (UMPA).
- 为了研究设计的吸收器的吸收特性,极化不敏感性和广角性能.
主要方法:
- 在吸收器设计中利用阻抗匹配理论.
- 使用数值分析来评估吸收光谱和性能.
- 在Si3N4圆柱体结构中集成了一个Ti高波矩形,以实现超宽带吸收.
主要成果:
- 该NMA实现了99.9%的峰值吸收,带宽为4.8μm (>90%的吸收).
- UMPA的超宽带吸收率为7-17μm (10μm带宽),平均吸收率为96.6%.
- UMPA证明了极化不敏感和广角吸收,在斜率发生时保持高效率.
结论:
- 设计的UMPA在长红外频谱中实现了优异的超宽带吸收.
- 吸收器的性能归因于局部表面等离子体共振,法布里-佩罗特共振和相互共振相互作用.
- 开发的元材料吸收器显示出在红外传感和能量收集方面的应用潜力很大.
相关概念视频
Radiation: Applications
1.2K
The average temperature of Earth is the subject of much current discussion. Earth is in radiative contact with both the Sun and dark space; it receives almost all its energy from the radiation of the Sun and reflects some of it into outer space. Dark space is very cold, about 3 K, so Earth radiates energy into it. For instance, heat transfer occurs from soil and grasses, the rate of which can be so rapid that frost can occur on clear summer evenings, even in warm latitudes.
The average...
The average...
1.2K
IR Spectrum
1.0K
When infrared (IR) radiation passes through a molecule, the bonds stretch or bend by absorbing the radiation. This absorption creates the molecule's absorption spectrum, which is the plot of its percentage transmittance versus wavenumber.
Transmittance is defined as the ratio of the radiant power passing through a sample to that from the radiation's source. Multiplying the transmittance by 100 gives the percent transmittance (%T), which varies between 100% (no absorption) and 0%...
Transmittance is defined as the ratio of the radiant power passing through a sample to that from the radiation's source. Multiplying the transmittance by 100 gives the percent transmittance (%T), which varies between 100% (no absorption) and 0%...
1.0K
IR Spectrometers
1.2K
There are two main infrared (IR) spectrophotometers: dispersive IR spectrometers and Fourier transform infrared (FTIR) spectrometers. In a dispersive IR spectrometer, a beam of infrared radiation produced by a hot wire is divided into two parallel equal-intensity beams using mirrors. One beam passes through the sample, while another is a reference beam. The beams then move through the monochromator, which separates the radiations into a continuous spectrum of different frequencies. The...
1.2K
Attenuated Total Reflectance (ATR) Infrared Spectroscopy: Overview
382
Attenuated total reflectance (ATR) infrared spectroscopy is a powerful analytical technique used to study the composition of materials. It is widely employed in chemistry, materials science, forensic science, and other fields where sample characterization is required. ATR has several advantages over traditional transmission IR spectroscopy, including the requirement of little to no sample preparation and the ability to analyze a wide range of samples.
The ATR process begins by directing a beam...
The ATR process begins by directing a beam...
382
Absorption of Radiation
739
The rate of heat transfer by emitted radiation is described by the Stefan-Boltzmann law of radiation:
739
IR Frequency Region: Fingerprint Region
906
IR spectra are divided into two main regions: the diagnostic region and the fingerprint region. The diagnostic region of the spectrum lies above 1500 cm−1. The absorptions resulting from single-bond vibrations of the N–H, C–H, and O–H stretch at higher wavenumbers and appear on the left side of the spectrum. The stretching absorptions of the C≡C and C≡N occur between 2100–2300 cm−1. In contrast, those arising from stretching absorptions of the...
906


