相关实验视频

Updated: Jul 8, 2025

Expression of Cementitious Pore Solution and the Analysis of Its Chemical Composition and Resistivity Using X-ray Fluorescence
06:27

Expression of Cementitious Pore Solution and the Analysis of Its Chemical Composition and Resistivity Using X-ray Fluorescence

Published on: September 23, 2018

9.3K

混凝土类型的影响,多余的去除,以及对混凝土接头的抛光

Georg Beierlein, Laura Haas, Sebastian Hahnel

    Quintessence international (Berlin, Germany : 1985)
    |December 18, 2023
    PubMed
    概括

    选择的凝固系统和过剩去除技术显著影响到复合冠的边际间隙尺寸. 抛光提高了间隙质量,特别是在玻璃离子体和树脂基水泥.

    关键词:
    粘合剂是一种粘合剂.混凝土合体 混凝土合体是什么混凝土类型 水泥类型凝固凝固凝固凝固凝固凝固凝固凝固凝固凝固这是一个复合材料.过剩的去除 过剩的去除这是一个边际调整.这是一个边际差距.抛光 抛光 抛光 抛光

    更多相关视频

    Impact of Fabrication Techniques and Polishing Procedures on Surface Roughness of Denture Base Resins03:02

    Impact of Fabrication Techniques and Polishing Procedures on Surface Roughness of Denture Base Resins

    Published on: January 17, 2025

    339
    Determination of Aggregate Surface Morphology at the Interfacial Transition Zone ITZ08:59

    Determination of Aggregate Surface Morphology at the Interfacial Transition Zone ITZ

    Published on: December 16, 2019

    8.2K

    相关概念视频

    Types of Cement II01:22

    Types of Cement II

    Portland blast-furnace cement is made by blending Portland cement clinker with granulated blast-furnace slag, which accounts for 25 to 65 percent of the cement's weight. Despite its similarities to ordinary Portland (Type I) cement in terms of fineness and setting times, its early strength is lower, though it achieves comparable strength later on. It's particularly suited for mass concrete structures and marine environments due to its lower heat of hydration and superior sulfate...
    109
    Porosity in Cement Paste01:18

    Porosity in Cement Paste

    The porosity of concrete is a measure of the void spaces within its structure. These spaces impact its strength and durability significantly. When water and cement interact, a chemical reaction called hydration creates a semi-solid paste. This paste includes combined water, making up approximately 23% of the cement's dry mass, and gel water, which fills minuscule voids known as gel pores, accounting for about 28% of the cement gel volume.
    The balance of water to cement in the mix is...
    143
    Types of Cement I01:21

    Types of Cement I

    Portland cement comes in several types, each with distinct properties and applications based on their chemical composition and hydration characteristics:
    Type I (Ordinary Portland Cement) is widely used for general construction where special properties are not required. It has moderate sulfate resistance and heat of hydration.
    Type II (Modified Cement) offers moderate resistance to sulfate attack and a lower rate of heat development compared to Type I. It is suitable for structures in...
    125
    Fineness of Cement01:15

    Fineness of Cement

    The fineness of cement directly influences the rate of hydration, as the hydration begins at the surface of the cement particles. In addition to hydration, the fineness of cement is vital for various properties of concrete including workability, gypsum requirement, and long-term behavior. The fineness of cement is represented in terms of the specific surface of cement which is typically measured in square meters per kilogram, with several methods available for this determination.
    Direct...
    132
    Strength of Cement01:20

    Strength of Cement

    Strength tests for cement are not performed directly on neat cement paste due to difficulty in obtaining consistent, reliable specimens. Instead, cement is typically tested in the form of cement-sand mortar.
    For compressive strength tests, ASTM C 109-05 standards prescribe a cement-sand mix ratio of 1:2.75 and a water/cement ratio of 0.485 for making 2-inch cubes. These cubes are mixed, cast, and cured in saturated lime water at 23°C until testing. Flexural strength testing, outlined in...
    138
    Curing of Concrete01:20

    Curing of Concrete

    The hydration of cement takes place within the water-filled capillary pores. However, environmental elements can disrupt this process by evaporating water from the concrete surfaces. Sealed concrete with a water-cement ratio below 0.5 experiences self-desiccation, leading to water loss. The water loss in concrete is mitigated by curing. This technique involves keeping the concrete saturated to maintain the necessary temperature and moisture conditions, to optimally fill the spaces in the cement...
    96