相关实验视频

Updated: Jul 5, 2025

Visualization of Failure and the Associated Grain-Scale Mechanical Behavior of Granular Soils under Shear using Synchrotron X-Ray Micro-Tomography

Visualization of Failure and the Associated Grain-Scale Mechanical Behavior of Granular Soils under Shear using Synchrotron X-Ray Micro-Tomography

Published on: September 29, 2019

用微型CT来制造织输送带尸体的陀螺结构的表面评估

Jozef Tkac¹, Teodor Toth², Gabriel Fedorko³

¹Faculty of Manufacturing Technologies, Technical University of Kosice with a seat in Presov, Sturova 31, 08001 Presov, Slovakia.

|January 11, 2024

概括

这项研究分析了使用工业计算机断层扫描使用Flexfill 92A材料制成的状腺结构. 结果显示,尺寸精度随相对密度而变化,影响了潜在的增材制造应用.

科学领域:

材料科学材料科学材料科学
添加剂制造添加剂制造添加剂制造
计量学计量学计量学

背景情况:

状腺结构在增材制造中很常见.
Flexfill 92A是一种用于3D打印的材料.
计量分析对于验证制造部件至关重要.

研究的目的:

为了对Flexfill 92A轮状腺结构进行计量分析.
为了评估相对密度对尺寸精度的影响.
评估增材制造对输送带部件的适用性.

主要方法:

工业计算机断层扫描用于分析.
制造的标本的相对密度从25%到85%.
应用了具有内部缺陷关闭的表面测定.

主要成果:

最小的外部维度偏差发生在较高的相对密度.
墙壁厚度在相对密度为45%时显示最小的变化.
材料体积始终低于理论值,表面积更大.

结论:

计量分析显示,3D打印的状腺结构中密度依赖的尺寸精度.
这些发现为织输送带骨架的增材制造的潜在使用提供了信息.
需要进一步的研究来优化用于工业应用的增材制造.

关键词:

扫描 CT 扫描扫描 CT 扫描添加剂制造添加剂制造添加剂制造体体体体胃腺瘤 (Gyroid) 是一种疾病.皮织品输送带输送带皮织品输送带

更多相关视频

Synthesis of Programmable Main-chain Liquid-crystalline Elastomers Using a Two-stage Thiol-acrylate Reaction

Synthesis of Programmable Main-chain Liquid-crystalline Elastomers Using a Two-stage Thiol-acrylate Reaction

Published on: January 19, 2016

Use of Micro X-ray Computed Tomography with Phosphotungstic Acid Preparation to Visualize Human Fibromuscular Tissue

Use of Micro X-ray Computed Tomography with Phosphotungstic Acid Preparation to Visualize Human Fibromuscular Tissue

Published on: September 5, 2019

相关概念视频

Flat Belts: Problem Solving

Flat Belts: Problem Solving

Flat belts are crucial in many industrial applications as they help transmit power from one pulley to another. The concept of forces and moments is used to determine the maximum moment on a pulley. For instance, consider a flat belt that wraps around two pulleys, A and B, with radii of 30 cm and 10 cm, respectively. The angle between the belt and the horizontal is 20 degrees at the pulleys. As pulley B rotates clockwise and drives pulley A, tension T2 is caused at one end of the belt, while...