关于pH对酸盐-蒙特莫里隆石纳米复合物水凝粘弹性反应的影响
Haniyeh Malektaj1, Aleksey D Drozdov1, Elham Fini2
1Department of Materials and Production, Aalborg University, Fibigerstraede 16, 9220 Aalborg, Denmark.
Molecules (Basel, Switzerland)
|January 11, 2024
概括
-酸-蒙莫里隆纳米复合物水凝在酸性条件下保持结构完整性. 这一进步提高了它们在需要在广泛pH范围内的稳定性应用中的实用性.
科学领域:
- 材料科学 材料科学 材料科学
- 生物材料工程 生物材料工程
- 聚合物化学 聚合物化学
背景情况:
- 酸水凝被广泛使用,但在低pH下降解.
- 开发pH稳定的水凝对于药物输送和组织工程等各种应用至关重要.
研究的目的:
- 为了创建和描述-酸-蒙莫里隆尼特 (Ca-酸-MMT) 纳米复合物水凝.
- 评估它们在不同pH值的结构完整性和机械性能.
主要方法:
- 制备不同度的Ca-alginate-MMT纳米复合物凝.
- 分析化学结构,形态和机械反应.
- 在pH 7和pH 2时进行小幅度压力振荡试验.
- ATR-FTIR光谱学和广角X射线衍射.
主要成果:
- 同质的纳米复合材料凝达到4重量%的MMT和0.5M的CaCl2.
- 酸-MMT凝保持完整性,并在pH 2时膨胀.
- 弹性模块因物理债券而与MMT度线性增加.
- 聚合物链的间隙增加了粘土层间的间距.
结论:
- 酸-MMT纳米复合物水凝表现出增强的pH稳定性.
- 纳入MMT可以改善机械性能和结构完整性.
- 这些纳米复合物水凝对要求低pH电阻的应用非常有希望.
相关概念视频
Determining the pH of Salt Solutions
The pH of a salt solution is determined by its component anions and cations. Salts that contain pH-neutral anions and the hydronium ion-producing cations form a solution with a pH less than 7. For example, in ammonium nitrate (NH4NO3) solution, NO3− ions do not react with water whereas NH4+ ions produce the hydronium ions resulting in the acidic solution. In contrast, salts that contain pH-neutral cations and the hydroxide ion-producing anions form a solution with a pH greater than 7. For...
Common Ion Effect
Compared with pure water, the solubility of an ionic compound is less in aqueous solutions containing a common ion (one also produced by dissolution of the ionic compound). This is an example of a phenomenon known as the common ion effect, which is a consequence of the law of mass action that may be explained using Le Châtelier’s principle. Consider the dissolution of silver iodide:
Calculating pH Changes in a Buffer Solution
A buffer can prevent a sudden drop or increase in the pH of a solution after the addition of a strong acid or base up to its buffering capacity; however, such addition of a strong acid or base does result in the slight pH change of the solution. The small pH change can be calculated by determining the resulting change in the concentration of buffer components, i.e., a weak acid and its conjugate base or vice versa. The concentrations obtained using these stoichiometric calculations can be used...
Ionic Strength: Effects on Chemical Equilibria
The addition of an inert ionic compound increases the solubility of a sparingly soluble salt. For example, adding potassium nitrate to a saturated solution of calcium sulfate significantly enhances the solubility of calcium sulfate. Le Châtelier's principle cannot predict this shift in the equilibrium. Instead, this could be explained in terms of changes in the effective concentration of the ions in solution in the presence of added inert salt.
In this solution, the primary cation—the calcium...
In this solution, the primary cation—the calcium...
Extraction: Effects of pH
Consider a neutral form of an amine, B, with a partition coefficient, K, in a liquid mixture containing organic and aqueous phases. The pH of the aqueous phase affects the charge on acidic and basic solutes, and the charged form is usually more soluble in the aqueous phase. Suppose the conjugate acid form of the amine is soluble only in the aqueous phase while the base form is soluble in both phases. Then the distribution coefficient, D, can be given as the ratio of amine concentration in the...
Effect of Sea Water on Concrete
Concrete exposed to seawater can undergo degradation like the dissolution of ettringite and gypsum, increasing the material's porosity and decreasing its strength. In contrast, the crystallization of salts within the concrete's pores can cause expansion, particularly above the waterline where evaporation occurs. Nonetheless, this expansion only happens when seawater, enabled by the concrete's permeability, manages to infiltrate the structure.
Concrete in areas between tide marks, which undergo...
Concrete in areas between tide marks, which undergo...


