对页岩气水平井的钻孔优化方法的研究和应用,在密集部分模式下对多集群裂变进行数值模拟
Chang Liu1, Haitao Li1, Hongwen Luo1
1State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Chengdu 610500, China.
ACS omega
|January 15, 2024
概括
在多集群裂解中优化穿孔参数可以提高非传统油气井的均性和产量. 本研究引入了一个数值模型,以识别改善压裂结果的关键因素.
科学领域:
- 石油工程是石油工程中的一个.
- 非传统资源开发开发 非传统资源开发
- 断裂力学 断裂力学 断裂力学
背景情况:
- 多集群裂变对于非常规的石油和天然气开采至关重要,但不规则的裂变几何导致生产不均.
- 优化穿孔参数往往被忽视,尽管它对断裂均性和井生产率有重大影响.
- 解决不均的生产形状对于最大限度地从断裂的水平井中获得经济效益至关重要.
研究的目的:
- 引入一个优化方法,用于穿孔参数在多集群断裂.
- 调查穿孔参数对断裂传播和均性的影响.
- 提供建议,以提高井完工期间的断裂统一性.
主要方法:
- 使用位移不连续方法 (DDM) 开发一个完全合的伪3D数值模型用于多集群裂解.
- 将材料平衡,压力传导,孔侵蚀和启动异步估计集成到模型中.
- 使用修改的传播统一性指数 (Ufm) 来量化裂变统一性.
主要成果:
- 分析了20个模拟案例,根据各种穿孔参数模式分类.
- 确定集群间距,穿孔数和初始穿孔直径作为影响均性的关键因素.
- 证明优化的穿孔参数可以带来成功的破裂结果.
结论:
- 穿孔参数的优化对于在多集群断裂中实现均的断裂传播至关重要.
- 开发的数值模型有效地模拟和量化断裂统一性.
- 实施优化的穿孔参数可以显著提高非传统水库的生产和经济回报.
相关概念视频
Thin-Walled Hollow Shafts
In analyzing a thin-walled hollow shaft subjected to torsional loading, a segment with width dx is isolated for examination. Despite its equilibrium state, this segment faces torsional shearing forces at its ends. These forces are quantitatively described by the product of the longitudinal shearing stress on the segment's minor surface and the area of this surface, leading to the concept of shear flow. This shear flow is consistent throughout the structure, indicating a uniform distribution of...
Porosity and Absorption of Aggregate
Aggregates contain pores of varying sizes; while some are completely enclosed within the particles, others open onto the surface, allowing water to penetrate. The porosity of aggregates is a major factor contributing to the overall porosity of concrete, given that aggregates constitute about three-quarters of concrete's volume.
When all pores in an aggregate are filled with water, the aggregate is considered saturated and surface-dry. If left in dry air, water will evaporate until the aggregate...
When all pores in an aggregate are filled with water, the aggregate is considered saturated and surface-dry. If left in dry air, water will evaporate until the aggregate...


