相关实验视频

Updated: Jun 20, 2026

Microfabricated Post-Array-Detectors mPADs: an Approach to Isolate Mechanical Forces
61:34

Microfabricated Post-Array-Detectors mPADs: an Approach to Isolate Mechanical Forces

Published on: October 1, 2007

12.5K

在可控制无CsCu2I3微线阵列上的空气稳定自动驱动紫外线光探测器

Zhi-Hong Zhang1,2, Shan-Shan Yan2, Yu-Long Chen2

  • 1State Key Laboratory of High Power Semiconductor Lasers, Changchun University of Science and Technology, Changchun 130022, China.

ACS applied materials & interfaces
|February 21, 2024
PubMed
概括

使用铜化物 (CsCu2I3) 微线阵列创建了高性能,自动供电的紫外线 (UV) 光探测器. 这些设备在检测弱紫外线光线方面表现出色,并随着时间的推移保持稳定性.

关键词:
在CsCu2I3I3中.微电线阵列是一个微电线阵列.佩洛夫斯基特是一种矿.自动驱动的光电探测器紫外线光电检测 紫外线光电检测

更多相关视频

Micropunching Lithography for Generating Micro- and Submicron-patterns on Polymer Substrates09:24

Micropunching Lithography for Generating Micro- and Submicron-patterns on Polymer Substrates

Published on: July 2, 2012

15.2K
Integrating a Triplet-triplet Annihilation Up-conversion System to Enhance Dye-sensitized Solar Cell Response to Sub-bandgap Light11:26

Integrating a Triplet-triplet Annihilation Up-conversion System to Enhance Dye-sensitized Solar Cell Response to Sub-bandgap Light

Published on: September 12, 2014

12.6K

相关概念视频

UV–Vis Spectrometers01:14

UV–Vis Spectrometers

The absorbance of UV and visible (UV–visible) radiations is measured using a UV–visible spectrophotometer. Deuterium lamps, which emit UV radiation, and tungsten lamps, which produce radiation in the visible region, are used as light sources in UV–visible spectrophotometers. A monochromator or prism is used for diffraction grating, i.e., to split the incoming radiation into different wavelengths. A system of slits is used to focus the desired wavelength on the sample cell. Samples for...
Gas Chromatography: Types of Detectors-II01:19

Gas Chromatography: Types of Detectors-II

In gas chromatography, different detectors are employed to meet specific analytical needs. These detectors are often categorized based on their detection mechanisms and the types of compounds they are best suited to analyze. Thermal Conductivity Detectors (TCD), Flame Ionization Detectors (FID), and Electron Capture Detectors (ECD) represent common categories, each with unique operating principles and applications. However, beyond these, several other detectors are designed for more specialized...
Atomic Emission Spectroscopy: Instrumentation01:22

Atomic Emission Spectroscopy: Instrumentation

The instrumentation of atomic emission spectrometry (AES) involves various components, including atomization devices that convert samples into gas-phase atoms and ions. There are two main types of atomization devices: continuous and discrete atomizers.  Continuous atomizers, like plasmas and flames, introduce samples in a constant stream, while discrete atomizers inject individual samples using syringes or autosamplers. The most common discrete atomizer is the electrothermal atomizer.
Determination of Crystal Structures01:29

Determination of Crystal Structures

In the late 1800s, the revelation that light extended beyond visible wavelengths led to the discovery of X-rays by Wilhelm Roentgen. Recognized as high-energy electromagnetic radiation with short wavelengths, X-rays prompted exploration into their interaction with crystals. Max von Laue proposed in 1912 that the periodic arrangement of atoms, ions, or molecules in crystals would cause them to diffract X-rays, a hypothesis confirmed through experiments with copper sulfate and zinc sulfide...