通过使用高分辨率计算机断层扫描 (μ-CT) 在现场压缩试验对轻质混凝土的研究
Cristin Umbach1, Bernhard Middendorf1
1Department of Structural Materials and Construction Chemistry, University of Kassel, Kassel, Germany.
Journal of microscopy
|February 24, 2024
概括
高分辨率计算机断层扫描 (μ-CT) 揭示了混凝土骨折行为. 这种先进的成像可以在结构故障之前检测出位移和损坏,有助于评估可用性和稳定性.
科学领域:
- 材料科学 材料科学 材料科学
- 土木工程 土木工程是指土木工程.
- 结构分析 结构分析
背景情况:
- 了解混凝土的断裂行为对于结构完整性和可用性至关重要.
- 现有的微观和宏观损坏模型往往缺乏在负载下详细的材料行为见解.
- 需要先进的成像技术来在混凝土中可视化内部损伤机制.
研究的目的:
- 用高分辨率计算机断层扫描 (μ-CT) 来研究轻质混凝土的断裂行为和模式.
- 开发和描述一种分析μ-CT数据的方法,以检测混凝土结构中的位移和裂.
- 评估μ-CT在评估混凝土和类似无机粘合剂系统中的结构行为和预测故障方面的潜力.
主要方法:
- 获取轻型混凝土样本的高分辨率计算机断层扫描 (μ-CT) 图像.
- 在μ-CT扫描之间对样品施加受控负荷,在测量过程中保持恒定负荷.
- 分析μ-CT数据集以量化移位和识别裂传播模式.
主要成果:
- 在灾难性的故障之前,成功地检测到混凝土结构内的移位和内部损伤.
- 该研究表明,μ-CT能够可视化和分析裂的开始和演变.
- 这些发现为了解压力下混凝土损坏的进展提供了基础.
结论:
- μ-CT成像是一种有效的方法,用于详细分析混凝土断裂行为.
- 使用μ-CT早期检测移位和损伤,可以更好地预测结构行为和潜在的故障.
- 描述的μ-CT方法可应用于各种混凝土类型和其他无机粘合剂系统,用于比较骨折分析.
更多相关视频
09:00Visualization of Failure and the Associated Grain-Scale Mechanical Behavior of Granular Soils under Shear using Synchrotron X-Ray Micro-Tomography
Published on: September 29, 2019
13.4K
05:38Production and Analysis of Sporosarcina pasteurii Biocement Bricks Using Custom 3D-Printed Molds for Unconfined Compression Tests
Published on: March 7, 2025
262
相关概念视频
01:12Non-destructive Tests for Concrete Strength
117
The rebound hammer test, also known as the Schmidt hammer test, is a non-destructive technique for evaluating the hardness of concrete and, indirectly, the strength of concrete. It operates on the principle that the rebound of a spring-driven mass from a concrete surface correlates to the surface's hardness. The device comprises a mass within a tubular housing, a spring mechanism, and a plunger that strikes the concrete. Upon release, the energy imparted to the mass by the spring causes it...
117
01:20Microcracking in Concrete
118
Microcracking in concrete refers to the tiny cracks that can form within the material even before any external load is applied. These microcracks typically occur at the interface between the coarse aggregate and the hydrated cement paste, often as a result of differential volume changes prompted by variations in stress-strain behavior, as well as thermal and moisture movement. Initially, these microcracks remain stable and do not grow substantially until the concrete is stressed to about 30...
118
01:23Behavior of Concrete Under Compressive Load
163
Concrete exhibits specific behaviors under different compressive loads. Understanding this is crucial for understanding its structural integrity. When concrete undergoes uniaxial compression, it tends to develop cracks that run parallel to the direction of the force. These parallel cracks stem from localized tensile stresses that occur perpendicular to the compression direction. Additionally, angled cracks may appear due to the formation of shear planes.
As the concrete specimen fractures under...
As the concrete specimen fractures under...
163
01:23Measurement of Air Content in Concrete
144
Air content measurement in concrete is critical for ensuring structural integrity and durability of concrete structures, especially in environments prone to severe weather conditions. Accurate air content analysis optimizes concrete's resistance to freeze-thaw cycles and enhances its workability and strength. Several methods are standardized under ASTM guidelines to measure the air content in fresh concrete, each suitable for different concrete types and conditions.
The pressure method,...
The pressure method,...
144
01:27Shrinkage in Concrete
98
Shrinkage in concrete is primarily due to water loss from evaporation, hydration of cement, or carbonation, leading to a reduction in volume. The volumetric contraction results in volumetric strain in concrete. However, in practice, shrinkage is measured as linear strain, which is one-third of the volumetric strain.
When concrete is still in its plastic state, it can undergo a decrease in volume by about 1% of its absolute volume. This decrease is known as plastic shrinkage. It arises either...
When concrete is still in its plastic state, it can undergo a decrease in volume by about 1% of its absolute volume. This decrease is known as plastic shrinkage. It arises either...
98
01:20Strength of Cement
137
Strength tests for cement are not performed directly on neat cement paste due to difficulty in obtaining consistent, reliable specimens. Instead, cement is typically tested in the form of cement-sand mortar.
For compressive strength tests, ASTM C 109-05 standards prescribe a cement-sand mix ratio of 1:2.75 and a water/cement ratio of 0.485 for making 2-inch cubes. These cubes are mixed, cast, and cured in saturated lime water at 23°C until testing. Flexural strength testing, outlined in...
For compressive strength tests, ASTM C 109-05 standards prescribe a cement-sand mix ratio of 1:2.75 and a water/cement ratio of 0.485 for making 2-inch cubes. These cubes are mixed, cast, and cured in saturated lime water at 23°C until testing. Flexural strength testing, outlined in...
137