辅助溶剂对净化效率的作用 在化层中的糖晶体化层中的辅助溶剂的影响
Mitra Ila1, Kim Miikki2, Marjatta Louhi-Kultanen1
1Department of Chemical and Metallurgical Engineering, School of Chemical Engineering, Aalto University, Espoo 02150, Finland.
Crystal growth & design
|March 11, 2024
概括
溶剂辅助层融结晶显著提高了糖的纯度. 使用像1-butanol和乙这样的二元溶剂可以提高晶体生长速度,并达到超过99.5%的纯度.
科学领域:
- 化学工程是化学工程的重要组成部分.
- 分离科学 分离科学
背景情况:
- 糖净化对于各种工业应用至关重要.
- 在传统方法中,将甘油从二甲基醇混合物中分离是具有挑战性的.
研究的目的:
- 评估层融结晶的效率,以选择性地分离糖.
- 调查溶剂辅助结晶对纯度和动力学的影响.
主要方法:
- 使用无溶剂和溶剂辅助方法,采用了层层融化结晶.
- 研究了1-butanol和1-butanol/二元溶剂的作用.
- 在不同低冷度和产量下分析了晶体生长动力学和产品纯度.
主要成果:
- 与无溶剂方法相比,添加溶剂 (单一和二元) 显著提高了晶体生长率和产品纯度.
- 二元溶剂系统比单一溶剂系统表现出更高的性能.
- 在第二个结晶阶段达到高于99.5%的糖纯度.
结论:
- 溶剂辅助层融结晶是一种高纯度甘油分离的有效技术.
- 二元溶剂系统为糖醇净化提供了更高的效率.
- 优化溶剂选择和结晶条件是最大化纯度的关键.
相关概念视频
Recrystallization: Solid–Solution Equilibria
1.1K
Recrystallization is a purification technique used to separate impurities from solid compounds. In this technique, no chemical reactions occur. Instead, it exploits physical properties only, specifically, the solubility differences between the desired compound and impurities, either at a single temperature or at different temperatures, and under other selected conditions. The solid-solution equilibrium (solubility equilibrium) of each component in the solution represents a binary phase...
1.1K
Crystal Growth: Principles of Crystallization
1.9K
Crystallization is a phase transformation process in which crystals are precipitated from a supersaturated solution or formed from other sources. During crystallization, atoms or molecules arrange themselves into a well-defined, rigid crystal lattice to minimize energy.
Initiating crystallization involves manipulating the concentration of the solute and the temperature of the solution. Since crystal growth occurs when the ratio of concentration and solubility of the solute in the solvent...
Initiating crystallization involves manipulating the concentration of the solute and the temperature of the solution. Since crystal growth occurs when the ratio of concentration and solubility of the solute in the solvent...
1.9K
Precipitation Processes
446
The experimental conditions in a gravimetric analysis should be optimized to maximize the particle size and purity of the obtained precipitate. Ideally, the concentration of the precipitating reagent should be low with effective stirring to maintain low relative supersaturation for the growth of large crystals. In homogeneous precipitation, the precipitant is slowly generated by a chemical reaction in the solution to avoid local reagent excesses. For example, urea decomposes gradually to...
446
Colloidal precipitates
580
The high insolubility of some precipitates can result in an unfavorable relative supersaturation. This can lead to colloidal particles with a large surface-to-mass ratio, where adsorption is promoted. For instance, in the precipitation of silver chloride, silver ions are adsorbed on the surface of the colloidal particles, forming a primary layer. This layer attracts ions of opposite charge (such as nitrate ions), forming a diffuse secondary layer of adsorbed ions. This electric double layer...
580
Solution Formation
31.5K
There is no one solvent that can dissolve every type of solute. Some substances that readily dissolve in a certain solvent might be insoluble in a different solvent. A simple way to predict which substances dissolve in which solvent is the phrase "like dissolves like". This means that polar substances, such as salt and sugar, dissolve in a polar substance like water. In contrast, non-polar substances are more soluble in non-polar solvents such as carbon tetrachloride.
This selective...
This selective...
31.5K
Chemical and Solubility Equilibria
4.1K
The free energy change associated with dissolving a solute in a liter of solvent is called the free energy of a solution, ΔGsolution. The overall ΔGsolution is expressed as the balance of ΔGinteraction against the always-favorable free-energy of mixing, ΔGmixing. Solution formation is favorable if ΔGsolution is less than zero, whereas it is unfavorable if ΔGsolution is greater than zero. In short, for a solution to form and complete dissolution to take place,...
4.1K


