开发一个模块化的,开源的,低压的,漂流管离子运动谱仪
Nathan W Buzitis1, Brian H Clowers1
1Department of Chemistry, Washington State University, Pullman, Washington 99164, United States.
Journal of the American Society for Mass Spectrometry
|March 21, 2024
概括
开发了一种新的,低成本的低压漂流管离子移动系统. 该系统与离子陷质量分析仪相结合,为小分子和蛋白质提供高性能和广泛的应用.
科学领域:
- 分析化学 分析化学
- 物理化学 物理化学
背景情况:
- 低压离子移动 (IM) 系统对于化学分析至关重要,但通常是昂贵的,缺乏设计标准化.
- 具有成本效益和适应性的IM系统的有限可用性阻碍了其广泛采用.
研究的目的:
- 设计和描述一种新的,低成本的,低压的漂流管离子移动系统.
- 将这个系统与离子陷质量分析仪相结合,以提高分析能力.
主要方法:
- 使用FR4PCB电极和PTFE真空外构建一个低压IM系统.
- 集成定制的离子道和平面离子航天器,以实现高效的离子转移.
- 将IM系统连接到Thermo Scientific离子陷质量分析仪.
主要成果:
- 该系统证明了小分子和蛋白质的分辨能力高达85.
- 在与质量分析仪集成后,维持了离子传输和信号稳定性.
- 测量的离子流动性与理论和文献值有很好的一致性 (平均误差<1.3%).
结论:
- 开发的低压IM系统提供了一个具有成本效益和高性能的替代方案.
- 模块化设计可方便与各种质谱仪进行合,扩大分析可能性.
- 这一进步降低了在各种研究环境中利用离子移动性光谱学的障碍.
关键词:
富里叶变换是什么意思 富里叶变换仪器仪表仪器仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪器仪表仪表仪表仪器仪表仪表仪表仪器仪表仪器仪表仪器仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪表仪器仪表仪表仪表仪器仪表仪器仪表仪器仪表仪器仪表离子流动性光谱仪离子流动性光谱仪离子陷 MS MS 离子陷开源硬件是开源的硬件更多相关视频
08:56Detection of Regulated Ergot Alkaloids in Food Matrices by Liquid Chromatography-Trapped Ion Mobility Spectrometry-Time-of-Flight Mass Spectrometry
Published on: November 22, 2024
616
09:58A Modular Microfluidic Technology for Systematic Studies of Colloidal Semiconductor Nanocrystals
Published on: May 10, 2018
9.6K
相关概念视频
Tandem Mass Spectrometry
988
Tandem mass spectrometry is a technique that uses multiple mass analyzers in series to obtain a higher selectivity and signal-to-noise ratio for the analyte. Instruments with multiple analyzers separated by an interaction cell enable secondary fragmentation and selected study of the fragment ions.
Secondary fragmentations occur in the interaction cell and can be induced by various factors. Fragmentation induced by collision with inert gases, such as N2, Ar, He, etc., is called collision-induced...
Secondary fragmentations occur in the interaction cell and can be induced by various factors. Fragmentation induced by collision with inert gases, such as N2, Ar, He, etc., is called collision-induced...
988
Atomic Emission Spectroscopy: Instrumentation
379
The instrumentation of atomic emission spectrometry (AES) involves various components, including atomization devices that convert samples into gas-phase atoms and ions. There are two main types of atomization devices: continuous and discrete atomizers. Continuous atomizers, like plasmas and flames, introduce samples in a constant stream, while discrete atomizers inject individual samples using syringes or autosamplers. The most common discrete atomizer is the electrothermal atomizer.
379
Mass Spectrometers
5.4K
This lesson details the instrumentation of a mass spectrometer—a physical instrument to perform mass spectrometry on analyte molecules and record the characteristic mass spectra. This is achieved via three chief functions:
5.4K
Mass Analyzers: Common Types
604
The quadrupole mass analyzer consists of four cylindrical metal rods arranged in a diamond carrying a DC voltage and a radio-frequency AC voltage. The motion of ions through the quadrupole depends on the field strength, causing only ions of a certain m/z to resonate successfully and strike the detector at a given field strength. Though the transmission rate for these analyzers is high, the exact elemental composition of the sample is not determined because of low resolution; however, they are...
604
Atomic Absorption Spectroscopy: Instrumentation
632
An atomic absorption spectrophotometer (AAS) comprises several components: a radiation source, an atomizer, a monochromator, and a detector. The radiation source can be a hollow-cathode lamp (HCL) or an electrodeless-discharge lamp (EDL), both of which provide a narrow emission line of the required wavelength. However, some instruments use continuum sources and high-resolution monochromators to achieve a narrow range of radiation.
The atomizer used in AAS can be either a flame atomizer or an...
The atomizer used in AAS can be either a flame atomizer or an...
632
Inductively Coupled Plasma–Mass Spectrometry (ICP–MS): Overview
730
In inductively coupled plasma–mass spectrometry (ICP–MS), an inductively coupled plasma (ICP) torch is used as an atomizer and ionizer. Solid samples are dissolved and volatilized before being introduced into the high-temperature argon plasma, while solution samples are nebulized and passed through the high-temperature argon plasma. Plasma dissociates the analytes and ionizes their component atoms to form a mixture of positive ions and molecular species. The positive ions are then...
730
