从湿处理和干处理的银粉中合成的糊的物理性质
Hyun Jin Nam1, Minkyung Shin2, Hye Young Koo3
1ICT Device Packaging Research Center, Korea Electronics Technology Institute, Seongnam 13509, Republic of Korea.
Materials (Basel, Switzerland)
|March 28, 2024
概括
干粉 (DP) 加工的银糊与湿粉 (WP) 加工的糊相比,提供了优越的低温固化性能. 固化后DP糊具有更高的导电性,非常适用于需要高效低温银电极形成的应用.
科学领域:
- 材料科学 材料科学 材料科学
- 纳米技术 纳米技术
- 电化学 电化学 电化学
背景情况:
- 银 (Ag) 粉合成方法,湿粉 (WP) 和干粉 (DP),产生不同的颗粒特性.
- WP合成提供颗粒大小控制,但结果是低纯度,较少的晶体颗粒.
- DP合成产生纯净的,高度结晶的颗粒,但产生更高的加工成本.
研究的目的:
- 为了比较由WP和DP合成粉末制成的Ag糊的特征和低温固化性能.
- 评估每种糊类型对于低温固化应用的适用性.
主要方法:
- 使用WP和DP方法合成Ag粉末.
- 来自合成粉末的Ag糊的配方.
- 面料的风病学分析 (剪切应力与剪切速率)
- 印和低温固化 (30分钟在130°C) 的Ag糊.
- 测量固电极的电导率.
主要成果:
- WP糊表现为塑料流体,而DP糊表现为伪塑料,接近牛顿流体的行为.
- 低温固化 (130°C30分钟) 产生了一种非导电的WP糊.
- 在相同的固化条件下,DP糊在相同的固化条件下达到61mΩ/平方的导电率.
结论:
- 通过DP加工生产的高晶银粉是通过低温固化实现导电电极的优势.
- 与WP糊相比,DP糊在低温固化应用中表现出优越的性能.
相关概念视频
Colloidal precipitates
576
The high insolubility of some precipitates can result in an unfavorable relative supersaturation. This can lead to colloidal particles with a large surface-to-mass ratio, where adsorption is promoted. For instance, in the precipitation of silver chloride, silver ions are adsorbed on the surface of the colloidal particles, forming a primary layer. This layer attracts ions of opposite charge (such as nitrate ions), forming a diffuse secondary layer of adsorbed ions. This electric double layer...
576
Washing, Drying, and Ignition of Precipitates
911
After filtration, the precipitate is washed to remove coprecipitated impurities and any remaining mother liquor. Colloidal precipitates, such as silver chloride, are washed with an electrolyte (such as dilute nitric acid) to prevent the peptization of the precipitate. In the case of slightly soluble precipitates, the wash solution contains a common ion to reduce solubility. Lead sulfate, which is slightly soluble in water, is washed with dilute sulfuric acid. Similarly, wash solutions may be...
911
Preparation of Samples for Electron Microscopy
5.4K
To be visualized by an electron microscope, either transmission or scanning, biological samples need to be fixed (stabilized) so the electron beam does not destroy them and dried thoroughly (desiccated/dehydrated) so the vacuum does not affect them. Fixation needs to be done as quickly as possible because the sample properties will start changing as soon as it is removed from its natural environment. For example, in a tissue sample, the oxygen levels begin decreasing, causing an altered...
5.4K


