相关实验视频
Updated: Jun 29, 2025

Low-energy Cathodoluminescence for OxyNitride Phosphors
Published on: November 15, 2016
EJ-299-02H闪电器的闪光特性
N Floyd1,2, Md T Hassan1, Z Tang1
1Los Alamos National Laboratory, Los Alamos, New Mexico 87545, USA.
这项研究量化了用于超冷中子 (UCN) 检测的塑料闪电器的死层和火系数. 结果允许UCN实验的低能量值,提高β粒子检测效率.
科学领域:
- 核物理 核物理 核物理
- 材料科学 材料科学 材料科学
背景情况:
- 塑料闪器对于检测超冷中子 (UCN) 实验中的粒子至关重要.
- 精确地描述闪电器属性,例如死层厚度和火因子,对于优化检测效率和实现精确测量至关重要.
研究的目的:
- 确定用于UCN应用的塑料闪电器的死层厚度和火系数 (伯克斯定律系数).
- 评估使用特征闪器实现UCN检测低能值的可行性.
主要方法:
- 采用阿尔法光谱法测量了薄表面的死层厚度.
- 来自241Am衰变和康普顿散射的相对光输出被用来确定伯克斯定律系数 (kB).
主要成果:
- 发现死亡层的厚度为630±110nm.
- 伯克斯定律系数 (kB) 确定为0.087 ± 0.003 mm/MeV,与聚烯基闪器相一致.
- 结合这些参数的模拟表明可实现的能量值约为9 keV.
结论:
- 具有特色的塑料闪电器,其薄薄的死层和确定火系数,可以达到适合UCN实验如UCNProBe.Be的低能耗值.
- 这使得有效的β粒子检测和间接的UCN测量成为可能.
- 化闪器的潜力为捕捉UCN和在各种UCN实验中现场检测带电粒子提供了独特的能力.
更多相关视频
06:28Visualization of Low-Level Gamma Radiation Sources Using a Low-Cost, High-Sensitivity, Omnidirectional Compton Camera
Published on: January 30, 2020
11:27Studying Soft-matter and Biological Systems over a Wide Length-scale from Nanometer and Micrometer Sizes at the Small-angle Neutron Diffractometer KWS-2
Published on: December 8, 2016
相关概念视频
Scanning Electron Microscopy
Fundamental Principles
Accelerated...
Inductively Coupled Plasma Atomic Emission Spectroscopy: Instrumentation
There are three main types of inductively coupled plasma atomic emission spectroscopy (ICP-AES) instruments: sequential, simultaneous multichannel, and Fourier transform instruments, with the latter being less commonly used....
Atomic Emission Spectroscopy: Instrumentation
Atomic Emission Spectroscopy: Lab