外部喷气雾化和测量风扇的性能
Jeyanthan Jayakumaran1, Gerald C Smaldone1, Ann D Cuccia2
1The Division of Pulmonary, Critical Care and Sleep Medicine, Department of Medicine, Stony Brook University Medical Center, Stony Brook, New York.
机械通风期间的外部雾化不准确地膨胀了内流传感器的机器上显示的潮体积 (VT). 实际的VT和峰值吸气压 (PIP) 变化较小,可以使用PIP监测.
科学领域:
- 机械通风机械通风机械通风
- 呼吸系统护理 呼吸系统护理
- 医疗器械技术 医疗器械技术
背景情况:
- 侵入性通风期间的外部流量喷射雾化增加了显示的呼出的潮体积 (VT).
- 这些显示的VT增加的准确性是可疑的.
- 使用ASL 5000模拟器来评估通风参数.
研究的目的:
- 为了调查在外部流量喷射雾化过程中显示的排气潮体积的准确性.
- 为了确定雾化对实际VT,最大吸入压力 (PIP) 和到最低压力的时间的影响.
- 为了比较具有内部和外部流量传感器的通风器.
主要方法:
- 通过各种模式 (体积和压力控制) 测试了带有内部和外部流量传感器的通风器.
- 在基线使用ASL 5000并添加外部流量 (3.5或8L/分钟) 模拟患者状况 (正常,COPD,ARDS).
- 评估了患者触发和呼吸机灵敏度.
主要成果:
- 内部流量传感器显示显示的VT从10%增加到118%,而实际VT和PIP的增加分别仅为4%-21%和6%-24%
- 实际的VT变化与PIP变化密切相关 (R2 = 0.68).
- 在Y片接口的外部流量传感器显示了统计学上微不足道的体积和压力变化.
结论:
- 外部雾化导致实际体积变化比内部流量传感器的通风机显示的更小.
- 主要在具有内部流量传感器的通风机中观察到显著的影响.
- 峰值吸气压 (PIP) 可以用于估计在雾化剂治疗期间的实际VT变化.
更多相关视频
09:36Halogenated Agent Delivery in Porcine Model of Acute Respiratory Distress Syndrome via an Intensive Care Unit Type Device
Published on: September 24, 2020
07:28Dry Powder and Nebulized Aerosol Inhalation of Pharmaceuticals Delivered to Mice Using a Nose-only Exposure System
Published on: April 6, 2017
相关概念视频
Mechanical Ventilation II: Invasive Ventilation
Negative-Pressure Ventilators
Negative-pressure ventilators create a vacuum around the chest or body to draw air into the lungs, simulating breathing. This method does not require an...
Mechanical Ventilation I: Indication and Settings
Mechanical Ventilation III: Noninvasive Ventilation
Noninvasive Positive-Pressure Ventilation...
Ventilatory Modes
There are three ventilatory modes: full support, partial support, and spontaneous. These are described below.
Full Support Modes
Full support modes include controlled mechanical ventilation, continuous mandatory...
Respiratory Volumes
Tidal Volume (TV) Tidal volume (TV) is the air inhaled or exhaled in a...
Inhaled Medications
