设计和分析一个带有增强特征的间接升级直流-直流转换器
Majid Hosseinpour1, Elham Seifi2, Ali Seifi2
1Department of Electrical Engineering, University of Mohaghegh Ardabili, Ardabil, Iran. hoseinpour.majid@uma.ac.ir.
Scientific reports
|June 22, 2024
概括
本研究介绍了一种使用电压乘数整流器的改进间接直流-直流升级转换器. 这种新的设计实现了97%的效率,适用于电动汽车和可再生能源系统.
科学领域:
- 电气工程 电气工程
- 电力电子 电力电子 电力电子
- 能源转换 能源转换
背景情况:
- 直流-直流转换器对于各种电子系统的电压调节至关重要.
- 现有的转换器面临着效率和电压增长方面的挑战.
- 可再生能源和电动汽车的应用需要高性能转换器.
研究的目的:
- 介绍和分析一款具有电压乘数整流器的新型交联直流-直流升级转换器.
- 改进转换器特性以提高性能.
- 为了验证转换器在不同工作周期中的运行.
主要方法:
- 拟议的转换器集成了一个交叉增压阶段与一个电压乘数整流器 (VMR) 阶段.
- 分析涵盖了两个运行任务区域 (0 ≤ D ≤ 0.5 和 0.5 ≤ D < 1).
- 评估了平稳状态条件,寄生虫/理想模型,损失和效率.
主要成果:
- 转换器表现出高效率 (97%在150W输出功率下).
- 模拟证实了电压从25V转换为159.5V的情况.
- 一个实验室原型验证了模拟结果和数学模型.
结论:
- 拟议的交联直流-直流升级转换器提供了改进的特性和高效率.
- 该设计适合于要求高的应用,如储能,电动汽车和可再生能源.
- 实验验证证证实了转换器的精确性能.
相关概念视频
01:23Voltage Doubler Circuit
539
A voltage doubler circuit integrates two main components: a clamping section and a rectifier section. The clamping section consists of a capacitor (C1) and a diode (D1), whereas the rectifier section is equipped with another diode (D2) and capacitor (C2). This circuit produces an output voltage with twice the amplitude of the sinusoidal input voltage.
539
01:24Bridge rectifier
589
The bridge rectifier is essential in electronics for efficiently converting alternating current (AC) to direct current (DC). Comprised of four diodes configured in a bridge layout, this rectifier effectively processes both the positive and negative halves of the AC waveform, making it superior to half-wave and full-wave center-tapped rectifiers in terms of voltage regulation and output stability.
Operationally, the bridge rectifier allows current flow through two of its diodes during each...
Operationally, the bridge rectifier allows current flow through two of its diodes during each...
589
01:20Design Example: Capacitance Multiplier Circuit
765
In integrated circuit technology, a capacitance multiplier is often utilized to produce a larger capacitance value when a small physical capacitance falls short. This is achieved by a circuit that multiplies capacitance values by a factor of up to 1000, such that a 10-pF capacitor can replicate the performance of a 100-nF capacitor.
The circuit illustrated in Figure 1 below incorporates two op-amps, with the first operating as a voltage follower and the second acting as an inverting amplifier.
The circuit illustrated in Figure 1 below incorporates two op-amps, with the first operating as a voltage follower and the second acting as an inverting amplifier.
765
01:24Fast Decoupled and DC Powerflow
187
The fast decoupled power flow method addresses contingencies in power system operations, such as generator outages or transmission line failures. This method provides quick power flow solutions, essential for real-time system adjustments. Fast decoupled power flow algorithms simplify the Jacobian matrix by neglecting certain elements, leading to two sets of decoupled equations:
187
01:19Modeling of Diode Forward Characteristics
521
Understanding the behavior of diodes when forward-biased is a fundamental aspect of electronic circuit design and analysis. This analysis primarily utilizes two models: the exponential diode model and the constant-voltage-drop model. The exponential model comes into play when the source voltage exceeds 0.5 volts, pushing the diode current to rise exponentially above the saturation current. This relationship is graphically depicted in the current-voltage (I-V) curve, illustrating the diode's...
521
01:22Full wave rectifier
1.1K
A full-wave rectifier is a device that converts alternating current (AC) to direct current (DC) and is more efficient than its half-wave counterpart. It typically includes a center-tapped transformer, two diodes, and a load resistor. The secondary winding of the transformer is divided to provide two equal voltages of opposite polarities, which is the pivotal element of full-wave rectification.
1.1K