关于电化学进化,反应动力学和在氧降低反应的离子交换离子体-Pt接口上的质量传输的综合研究
Chang Liu1,2, Ruimin Ding1, Xi Yin1
1State Key Laboratory of Coal Conversion, Institute of Coal Chemistry, Chinese Academy of Sciences, Taiyuan, Shanxi 030001, China.
ACS applied materials & interfaces
|September 13, 2024
概括
离子体厚度通过改变 (Pt) 结构和氧气扩散,严重影响离子交换膜燃料电池 (AEMFC) 的性能. 较厚的离子体薄膜会降低氧降解反应 (ORR) 活性和质量转移.
科学领域:
- 电化学 电化学 电化学
- 材料科学 材料科学 材料科学
- 化学工程是化学工程的重要组成部分.
背景情况:
- 阳离子交换膜燃料电池 (AEMFC) 对于清洁能源至关重要.
- 了解离子体-催化剂接口是AEMFC开发的关键.
- 氧降解反应 (ORR) 动力学和质量转移是重要的性能指标.
研究的目的:
- 在AEMFC激活期间调查离子体-Pt接口的结构演变.
- 在稳定状态下分析ORR动力学和质量转移.
- 确定离子体厚度对接口特性和性能的影响.
主要方法:
- 研究了多晶 (多-Pt) 电极.
- 在激活过程中检查的离子体-Pt接口.
- 测量ORR动力学和质量转移特征.
- 计算的O2扩散系数和溶解度在FAA-3离子体中.
主要成果:
- 离子体厚度显著影响Pt表面结构和O2扩散.
- 较厚的离子体膜会导致更严重的电化学特征进化.
- 增加的离子体厚度会降低ORR运动活性和O2扩散流量.
- 较高的离子体厚度导致较低的极限电流密度.
结论:
- 离子体厚度是AEMFC性能的一个关键因素.
- 优化离子体薄膜厚度对于高效的ORR至关重要.
- 研究结果提供了关于AEMFCs中离子体-Pt接口行为的见解.
相关概念视频
Electrolysis
26.2K
In a galvanic cell, the electrical work is done by a redox system on its surroundings as electrons produced by the spontaneous redox reactions are transferred through an external circuit. Alternatively, an external circuit does work on a redox system by imposing a voltage sufficient to drive an otherwise nonspontaneous reaction in a process known as electrolysis. For instance, recharging a battery involves the use of an external power source to drive the spontaneous (discharge) cell reaction in...
26.2K
Ion Exchange
565
Ion exchange chromatography separates charged molecules from a solution by reversibly exchanging them with mobile, or 'active', ions associated with the oppositely charged stationary phase. This method can be used to separate ions, soften and deionize water, and purify solutions. The polymers comprising the ion-exchange column are high-molecular-weight and chemically stable polymers, crosslinked to be porous and essentially insoluble. They are also functionalized with either acidic or...
565
Interfacial Electrochemical Methods: Overview
223
Interfacial electrochemical methods focus on the phenomena occurring at the boundary between an electrode and a solution, as opposed to bulk methods that concentrate on the solution's overall properties. These interfacial methods are classified as either static or dynamic based on the presence of a nonzero current in the electrochemical cell and the consistency of analyte concentrations. Static methods, such as potentiometry, measure the cell's potential without any significant current...
223
Electrodeposition
612
Electrodeposition is a technique used to separate an analyte from interferents by electrochemical processes. Here, the analyte is a metal ion that can be deposited on an electrode immersed in the sample solution. The electrochemical setup consists of an anode and a cathode. When an electric current is applied to the setup, oxidation occurs at the anode. At the cathode, which consists of a large metal surface, metal ions undergo reduction and deposit onto the surface.
Electrodeposition can...
Electrodeposition can...
612
Redox Equilibria: Overview
544
A reduction-oxidation reaction is commonly called a redox reaction. In a redox reaction, electrons are transferred from one species to another rather than being shared between or among atoms. The reducing agent or reductant is the species that loses electrons and gets oxidized in the process. The species that gains electrons and gets reduced in the process is the oxidizing agent or oxidant. Redox reactions are represented as two separate equations called half-reactions, where one equation...
544
Electromotive Force
26.0K
Electricity is generated by either electrons or ions flowing through a solution or a conducting medium. This flow of electrons or specifically electrical charge is defined as an electric current. When electrons move through a wire, they generate an electric current. It can be recalled that in a redox reaction, electrons are lost and gained. In the spontaneous redox reaction of zinc with copper, when zinc is immersed in a copper ion solution, a transfer of electrons from one...
26.0K


