光漂白效应对杂光纤单模光纤剂量计在638nm的灵敏度校准的影响
Fiammetta Fricano1, Adriana Morana1, Martin Roche1,2,3
1Laboratory Hubert Curien, Université Jean Monnet, 42000 Saint-Etienne, France.
Sensors (Basel, Switzerland)
|September 14, 2024
概括
光漂白显著影响光纤剂量计,降低在更高激光功率的灵敏度. 脉冲激光操作可以减轻这种效应,为像LUMINA项目这样的应用保持剂量测量性能.
科学领域:
- 光学和光子学 在光学和光子学.
- 材料科学 材料科学 材料科学
- 辐射检测 辐射检测 辐射检测
背景情况:
- 光纤被用于辐射剂量测量.
- 光漂白 (PB) 可以影响光纤传感器的性能.
- 了解PB对于准确的剂量测量至关重要.
研究的目的:
- 研究光漂白对酸光纤剂量测量的影响.
- 量化激光功率对辐射敏感性的影响.
- 开发一个模型来预测不同条件下的纤维灵敏度.
主要方法:
- 辐射测试使用~40 keV的X射线在530 μ Gy ((SiO2) /s.
- 在现场测量辐射诱导衰减 (RIA) 的增长和衰减.
- 不同的注射激光二极管功率 (638nm) 从500nW到1mW.
主要成果:
- 在1μW以下,PB对纤维灵敏度的影响很小 (~140 dB km-1 Gy-1) 到~30 Gy.
- 在1μW以上,PB显著降低了灵敏度,降至1mW的~80dB km-1 Gy-1.
- 脉冲激光操作 (高达50μW) 可以保持剂量测量特性.
结论:
- 光漂白是限制光纤剂量计在较高激光功率下性能的一个关键因素.
- 脉冲激光系统提供了一种可行的策略,以减轻PB的影响.
- 需要进一步研究温度和剂量速率的依赖性.
相关概念视频
Fluorescence and Phosphorescence: Instrumentation
556
Fluorometers and spectrofluorometers are two types of instruments used for measuring molecular fluorescence. These instruments differ in how they select excitation and emission wavelengths and the type of light sources they utilize. Fluorometers use absorption interference filters to choose excitation and emission wavelengths. The excitation source in a fluorometer is typically a low-pressure mercury vapor lamp that emits intense lines distributed throughout the ultraviolet and visible regions.
556
Photoluminescence: Applications
383
Photoluminescence offers a wide range of applications due to its inherent sensitivity and selectivity. This technique allows for both direct and indirect analyses of the analyte. Direct quantitative analysis is possible when the analyte exhibits a favorable quantum yield for fluorescence or phosphorescence. However, an indirect analysis may be feasible if the analyte is not fluorescent or phosphorescent, or if the quantum yield is unfavorable. Indirect methods include reacting the analyte with...
383


