相关实验视频
Updated: Jun 7, 2025
07:45
Quasi-light Storage for Optical Data Packets
Published on: February 6, 2014
10.8K
概括
我们开发了一个宽带模型,用于在光纤放大器中刺激布里卢恩散射 (SBS). 该模型揭示了种子线宽和弗雷内尔反射如何影响SBS值,这对于高功率光纤激光器设计至关重要.
科学领域:
- 光学和光子学 在光学和光子学.
- 非线性光学是非线性光学.
- 光纤光学是指光纤的使用.
背景情况:
- 刺激布里卢恩散射 (SBS) 是光纤放大器中的一个关键的非线性效应,经常限制输出功率.
- 现有的模型通常假定种子线宽窄,这可能不适用于宽带源.
- 弗雷内尔反射可以影响SBS动态,但它们与宽带播种的相互作用需要进一步调查.
研究的目的:
- 在考虑宽带种子来源的光纤放大器中开发SBS的综合模型.
- 调查种子线宽和弗雷内尔反射对SBS值的影响.
- 分析宽带SBS中逆向反斯托克斯波的产生.
主要方法:
- 为SBS开发一个尺度,时间依赖,平面波模型.
- 包括一个宽带种子源,其线路宽度与布里卢恩频率转移相当或超过.
- 在光纤或出口面上纳入弗雷内尔反射.
- 对斯托克斯和逆向反斯托克斯波浪生成的分析.
主要成果:
- 宽带模型预测在没有弗雷内尔反射的情况下,SBS值与种子线宽的线性增加 (高达3倍布里卢恩频率转移).
- 在弗雷内尔反射的存在下,SBS值随着线宽的增加而以亚线性方式增加,这与实验数据一致.
- 对于特定的反射水平和紧的光谱,由于斯托克斯波播种,SBS值可以随着带宽的增加 (16-24 GHz) 而下降.
结论:
- 开发的宽带SBS模型准确地捕捉了种子线宽和弗雷内尔反射的影响.
- 种子线宽显著影响SBS值,在没有反射的情况下具有线性关系.
- 弗雷尼尔反射可以修改SBS值行为,在某些条件下可能导致值下降,带宽增加.
相关概念视频
01:23Small-Signal Analysis of MOSFET Amplifiers
510
In small-signal analysis, a MOSFET transistor amplifier acts as a linear amplifier when operating in its saturation region. The gate-to-source voltage (VGS) of the MOSFET is the sum of the DC biasing voltage and the small time-varying input signal. This combination sets up the operating point and modulates the drain current (ID) that flows from the drain to the source. When a small AC signal is superimposed on the DC bias voltage at the gate, the instantaneous drain current comprises three...
510
01:16Cascaded Op Amps
590
Operational amplifiers (op-amps) are versatile electronic components that can be interconnected in a cascade - one after another in a linear sequence. This cascading is possible due to their infinite input resistance and zero output resistance, allowing them to maintain their input-output relationships even when connected in series.
In a cascaded system, each op-amp is referred to as a stage. The output of one stage drives the input of the subsequent stage. As the input signal passes through...
In a cascaded system, each op-amp is referred to as a stage. The output of one stage drives the input of the subsequent stage. As the input signal passes through...
590
01:22Upsampling
204
Managing signal sampling rates is essential in digital signal processing to maintain signal integrity. A decimated signal, characterized by a reduced frequency range due to its lower sampling rate, can be upsampled by inserting zeros between each sample. This upsampling process expands the original spectrum and introduces repeated spectral replicas at intervals dictated by the new Nyquist frequency. To refine this zero-inserted sequence, it is passed through a lowpass filter with a cutoff...
204
01:14BJT Amplifiers
407
Bipolar Junction Transistors (BJTs) are pivotal components in amplifier circuits, functioning as voltage-controlled current sources in their active region. This characteristic allows them to efficiently control the collector current through variations in the base-emitter voltage. Essentially, BJTs amplify power due to their ability to take a weak input signal and output a much stronger signal.
In BJT amplifier configurations, particularly in common-emitter setups, the transistor's role...
In BJT amplifier configurations, particularly in common-emitter setups, the transistor's role...
407