相关实验视频
Updated: Jun 6, 2025

16:11
Implementation of a Reference Interferometer for Nanodetection
Published on: April 26, 2014
9.3K
机械干扰对里埃变换干扰仪中参考光的位置的影响
1Department of Physics, University of Limerick, Limerick V94T9PX, Ireland.
The Review of scientific instruments
|November 22, 2024
概括
福里埃变换干扰仪需要参考光来进行准确的测量. 将参考光线集成到测试光线路径中,与单独的路径相比,提供了对机械振动的优越稳定性.
科学领域:
- 光学工程是指光学工程.
- 计量学 计量学 计量学
- 振动分析 振动分析
背景情况:
- 里埃变换干扰仪依赖于稳定的参考光来准确测量光路径差异.
- 有各种方法可以将参考光纳入干扰仪设计中.
- 机械干扰可以显著影响干扰仪的性能和测量精度.
研究的目的:
- 通过实验评估机械干扰对在里埃变换干扰仪中纳入参考光的不同方法的影响.
- 为了比较单独与通用路径参考灯配置对抗振动的强度.
主要方法:
- 福里埃变换干扰仪的实验设置,具有不同的参考光整合策略.
- 在光学系统中控制引入机械干扰 (振动).
- 测量误差和在振动下性能降低的定量分析.
主要成果:
- 使用单独参考光路径的干扰仪对机械干扰具有很高的灵敏度.
- 干扰仪在与测试光线相同的光学路径内传播参考光,对机械振动具有显著的稳定性.
- 常见路径配置对测量精度的影响最小,尽管外部振动.
结论:
- 结合参考光的方法对于里埃变换干扰仪的机械稳定性至关重要.
- 对于对机械振动敏感的应用,强烈建议使用通道参考灯设计.
- 独立的参考光路径容易受到环境干扰,限制了它们在易感振动的环境中使用.
相关概念视频
IR Spectrometers
1.1K
There are two main infrared (IR) spectrophotometers: dispersive IR spectrometers and Fourier transform infrared (FTIR) spectrometers. In a dispersive IR spectrometer, a beam of infrared radiation produced by a hot wire is divided into two parallel equal-intensity beams using mirrors. One beam passes through the sample, while another is a reference beam. The beams then move through the monochromator, which separates the radiations into a continuous spectrum of different frequencies. The...
1.1K
Interference: Path Lengths
1.3K
Consider two sources of sound, that may or may not be in phase, emitting waves at a single frequency, and consider the frequencies to be the same.
Two special sources may be considered when they are in phase. This can be easily achieved by feeding the two sources from the same source. An example would be synchronizing the two speakers by feeding them with the same source, such as the sound waves produced by a tuning fork. This setup ensures that the two sources have the same frequency and are...
Two special sources may be considered when they are in phase. This can be easily achieved by feeding the two sources from the same source. An example would be synchronizing the two speakers by feeding them with the same source, such as the sound waves produced by a tuning fork. This setup ensures that the two sources have the same frequency and are...
1.3K

