相关实验视频

Updated: Jun 4, 2025

Analyzing Melts and Fluids from Ab Initio Molecular Dynamics Simulations with the UMD Package
06:37

Analyzing Melts and Fluids from Ab Initio Molecular Dynamics Simulations with the UMD Package

Published on: September 17, 2021

4.4K

实验和数值分析酸盐材料的准静态和动态行为

Tomasz Jankowiak1, Jakub Rafał Ossowski2, Alexis Rusinek3

  • 1Institute of Structural Analysis, Poznan University of Technology, Piotrowo 5, 60-965 Poznan, Poland.

Materials (Basel, Switzerland)
|December 17, 2024
PubMed
概括

这项研究使用实验和模拟来探索酸盐材料的特性. 经过验证的混凝土损坏可塑性模型准确地预测了在静态和动态负载下酸盐的行为,包括抗冲击能力.

关键词:
在CDP模型中,CDP模型是:实验 实验 实验 实验 实验影响力影响力影响力影响力建模 建模模型 建模模型准静态的 准静态的酸盐是一种酸盐.

更多相关视频

Studying Large Amplitude Oscillatory Shear Response of Soft Materials06:07

Studying Large Amplitude Oscillatory Shear Response of Soft Materials

Published on: April 25, 2019

12.5K
Metal-silicate Partitioning at High Pressure and Temperature: Experimental Methods and a Protocol to Suppress Highly Siderophile Element Inclusions11:50

Metal-silicate Partitioning at High Pressure and Temperature: Experimental Methods and a Protocol to Suppress Highly Siderophile Element Inclusions

Published on: June 13, 2015

12.5K

相关概念视频

Stress-Strain Diagram - Brittle Materials01:24

Stress-Strain Diagram - Brittle Materials

Brittle materials, including glass, cast iron, and stone, exhibit unique characteristics. They fracture without considerable change in their elongation rate, indicating that their breaking and ultimate strength are equivalent. Such materials also show lower strain levels at the point of rupture. The failure in brittle materials predominantly results from normal stresses, as evidenced by the rupture created along a surface perpendicular to the applied load. These materials do not display...
2.2K
Dynamic Modulus of Elasticity of Concrete01:16

Dynamic Modulus of Elasticity of Concrete

The dynamic modulus of elasticity assesses how a concrete structure deforms under impact or dynamic loads. It is typically higher than the static modulus of elasticity, measured under slow, steady loading conditions.
The sonic test is a common method to determine the dynamic modulus. In this test, a concrete beam, sized either 6 x 6 x 30 inches or 4 x 4 x 20 inches, is clamped at its center. Vibrations are initiated at one end of the beam by an electromagnetic exciter unit powered by...
254