用贝废物作为吸附剂在包装的柱子中消除离子
S Baskar1, K R Aswin Sidhaarth2, L Mangaleshwaran3
1Department of Civil Engineering, Vel Tech Rangarajan Dr. Sagunthala R&D Institute of Science and Technology, Chennai, Tamil Nadu, 600062, India. baskars@veltech.edu.in.
粉末贝吸附剂有效地从废水中去除离子. 这项研究优化了包装床柱中高吸附效率和容量的条件,证明了其用于工业废水处理的潜力.
科学领域:
- 环境科学 环境科学
- 材料科学 材料科学 材料科学
- 化学工程是化学工程的重要组成部分.
背景情况:
- 工业废水中的离子污染对环境和健康构成重大风险.
- 传统的废水处理方法经常面临效率和成本效益方面的挑战.
- 低成本,可持续的吸附剂对于有效的重金属去除至关重要.
研究的目的:
- 为了评估粉状贝吸收剂 (PCSA) 在模拟废水中去除离子的有效性.
- 分析突破曲线 (BTC) 并优化连续流柱中的吸附参数.
- 评估托马斯和BDST模型用于预测列性能和扩展的适用性.
主要方法:
- 使用PCSA在玻璃柱中进行了连续吸附实验.
- 尼克离子去除效率和吸附能力在不同的入口流量 (Q) 和床长 (H) 下测量.
- 分析了突破曲线以确定质量转移区 (MTZ) 和置床长度 (Lu).
- 托马斯和床深服务时间 (BDST) 模型被应用来预测列动态和扩展参数.
主要成果:
- 在输入流量 (Q) 为8毫升/分钟,床长 (H) 为25厘米的情况下,达到87.68%的最大吸附效率.
- 最大吸附能力为1.05毫克/克.
- 对MTZ和Lu的分析表明,非理想的条件受床长度的影响.
- 托马斯模型准确地预测了列动态,并评估了BDST模型参数以进行扩展.
结论:
- 粉末贝是一种可行的,高效的吸附剂,可以从废水中去除离子.
- 优化的柱子参数 (流量,床长) 提高了吸附性能.
- 该研究为设计使用PCSA用于工业废水处理的包装床柱 (PBC) 提供了有价值的数据.
更多相关视频
08:01Removal of Arsenic Using a Cationic Polymer Gel Impregnated with Iron Hydroxide
Published on: June 28, 2019
10:31Detection and Recovery of Palladium, Gold and Cobalt Metals from the Urban Mine Using Novel Sensors/Adsorbents Designated with Nanoscale Wagon-wheel-shaped Pores
Published on: December 6, 2015
相关概念视频
Precipitation Gravimetry
In determining nickel by gravimetric analysis, a precipitant of ethanolic dimethylglyoxime is added to a hot nickel salt solution. This is quickly followed by the dropwise addition of dilute ammonia solution until precipitation occurs. A...
Ion-Exchange Chromatography
Colloidal precipitates
Gas Chromatography: Types of Columns and Stationary Phases
For an analyte to remain on the column for a sufficient amount of time, it must exhibit some level of compatibility (or...
Ion Exchange
Silica Gel Column Chromatography: Overview
Polar components tend to bind strongly to the silica gel, causing them to move slowly through the column. In contrast, nonpolar compounds...
