在不同操作条件下对有机兰金循环系统稳定状态运行的实验研究
1School of Mechanical & Electronical Engineering, Lanzhou University of Technology, Lanzhou, 730050, China.
Scientific reports
|January 6, 2025
概括
这项研究检查了3kW有机兰金循环 (ORC) 系统的六个操作条件. 结果显示,工作流体的性能相似,R245fa由于密度而产生更高的功率.
科学领域:
- 热力学是一种热力学.
- 能源系统工程 能源系统工程
背景情况:
- 有机兰金循环 (ORC) 系统对于废热回收至关重要.
- 了解运行条件对ORC性能的影响对于效率至关重要.
研究的目的:
- 为了研究六个操作条件对3kWORC系统的影响.
- 为了比较不同条件下不同工作流体的性能.
主要方法:
- 对3kW的ORC系统进行实验调查.
- 六个关键操作参数的系统变化.
- 对热力学性能指标的分析.
主要成果:
- 在不同的工作流体中,ORC系统的性能是相似的,尽管物理参数有所不同.
- 由于其密度,R245fa显示出更高的理论轴工作和发电机功率.
- 发电机最大功率转换效率达到了64.651% (C1),功率效率达到了27.346% (C3),循环效率达到了9.543% (C6),冷能利用率达到了5.633% (C6).
- 在C5下,最大发电量 (1.019千瓦) 和净工作 (1.321千瓦) 发生在C5下,与最大总能量损失 (13.756千瓦) 相吻合.
结论:
- 冷却水温度显著影响冷凝温度和整体系统性能.
- 即使在稳定状态下,发电机的输出功率也会因各种影响因素而大幅波动.
- 优化操作条件对于最大限度地提高ORC系统效率和功率输出,同时管理能量损失至关重要.
相关概念视频
The Carnot Cycle
2.8K
Converting work to heat is an irreversible process, and the purpose of a heat engine is to reverse the effect partially. Heat engines aim to increase the efficiency of the reversal, that is, maximize the work retrieved from heat. If the efficiency of a heat engine were 100%, it would imply reversing the process completely without introducing any other effect. Thus, it would violate the second law of thermodynamics.
What could be the theoretical limit to the efficiency of a heat engine? The...
What could be the theoretical limit to the efficiency of a heat engine? The...
2.8K
Efficiency of The Carnot Cycle
2.5K
The hypothetical Carnot cycle consists of an ideal gas subjected to two isothermal and two adiabatic processes. Since the internal energy of an ideal gas depends only on its temperature, which is the same before and after the completion of the Carnot cycle, there is no change in its internal energy. Hence, using the first law of thermodynamics, the total heat exchanged by the ideal gas equals the total work done. Thus, we can quantify the efficiency of the Carnot cycle via the heat exchanged...
2.5K
The Carnot Cycle and the Second Law of Thermodynamics
2.5K
The Carnot engine works between two heat reservoirs of fixed temperatures. The Carnot cycle begs the following question: Is it possible to devise a heat engine that is more efficient than a Carnot engine between two fixed temperatures? The answer lies in designing a Carnot refrigerator.
Since the individual steps in a Carnot cycle can be reversed, the entire cycle is, thus, reversible. If a Carnot cycle is reversed, it becomes a Carnot refrigerator. It extracts heat Qc from a cold reservoir at...
Since the individual steps in a Carnot cycle can be reversed, the entire cycle is, thus, reversible. If a Carnot cycle is reversed, it becomes a Carnot refrigerator. It extracts heat Qc from a cold reservoir at...
2.5K
Cyclic Processes And Isolated Systems
2.7K
A thermodynamic system with zero heat exchange and work is an isolated system. For these systems, the internal energy remains constant.
In the case of a non-isolated system, the change in the internal energy is zero only if the process is cyclic. A thermodynamic process is considered cyclic if the system undergoes a series of changes and returns to its initial state.
Consider a cyclic process that returns to its initial state, undergoing a four-step process. The heat transfer along each...
In the case of a non-isolated system, the change in the internal energy is zero only if the process is cyclic. A thermodynamic process is considered cyclic if the system undergoes a series of changes and returns to its initial state.
Consider a cyclic process that returns to its initial state, undergoing a four-step process. The heat transfer along each...
2.7K
Entropy Change in Reversible Processes
2.5K
In the Carnot engine, which achieves the maximum efficiency between two reservoirs of fixed temperatures, the total change in entropy is zero. The observation can be generalized by considering any reversible cyclic process consisting of many Carnot cycles. Thus, it can be stated that the total entropy change of any ideal reversible cycle is zero.
The statement can be further generalized to prove that entropy is a state function. Take a cyclic process between any two points on a p-V diagram.
The statement can be further generalized to prove that entropy is a state function. Take a cyclic process between any two points on a p-V diagram.
2.5K


