基于烯酸盐的液晶弹性体的弹性表征
Gevorg S Gevorgyan1, Maksim L Sargsyan1, Mariam R Hakobyan1
1Institute of Physics, Yerevan State University, Yerevan 0025, Armenia.
Polymers
|March 13, 2025
概括
这项研究完全描述了基于烯酸盐的液晶弹性体 (LCE),确定了它们的五个弹性系数. 这些发现为设计新兴技术中的LCE提供了关键数据.
科学领域:
- 材料科学 材料科学 材料科学
- 聚合物科学 聚合物科学
- 软物质物理学 软物质物理学
背景情况:
- 液晶弹性体 (LCE) 呈现出可逆的形状变化和光学特性,以应对刺激.
- 它们的独特特性使得它们适用于先进的技术应用.
- 了解LCE的机械特性对于研究其变形行为和设备集成至关重要.
研究的目的:
- 对基于烯酸盐的LCE材料进行全面的弹性表征.
- 确定控制这些LCE无弹性能量密度的五个弹性系数.
- 测量这些先进材料的模和波桑比率.
主要方法:
- 制造高度对齐的宏观样本的烯酸基LCEs.
- 进行三次拉伸实验,以测量材料反应.
- 将测量的应变与弹性系数相关联,以确定材料特性.
主要成果:
- 首次确定了基于烯酸盐的LCE的五个弹性系数.
- 在MPa的顺序上测量了Young的模块,其异性质比 (E‖/E) 约为4.5.
- 观察到的纵向波桑比率接近0.5,表明在低应变时具有单轴弹性反应.
结论:
- 实验弹性表征与LCE的理论预测很好地一致.
- 这项工作为有效设计和应用基于烯酸的LCE提供了必要的数据.
- 超出应变值的辅助性行为凸显了这些材料复杂的机械反应.
相关概念视频
Polymer Classification: Crystallinity
2.7K
Unlike ionic or small covalent molecules, polymers do not form crystalline solids due to the diffusion limitations of their long-chain structures. However, polymers contain microscopic crystalline domains separated by amorphous domains.
Crystalline domains are the regions where polymer chains are aligned in an orderly manner and held together in proximity by intermolecular forces. For example, chains in the crystalline domains of polyethylene and nylon are bound together by van der Waals...
Crystalline domains are the regions where polymer chains are aligned in an orderly manner and held together in proximity by intermolecular forces. For example, chains in the crystalline domains of polyethylene and nylon are bound together by van der Waals...
2.7K
Members Made of Elastoplastic Material
93
The behavior of elastoplastic materials under bending stresses, particularly in structural members with rectangular cross-sections, is crucial for predicting material responses and understanding failure modes. Initially, when a bending moment is applied, the stress distribution across the section follows Hooke's Law and is linear and elastic. This distribution means the stress increases from the neutral axis to the maximum at the outer fibers, up to the elastic limit.
As the bending moment...
As the bending moment...
93


