对于用于间接光子计数X射线探测器的闪光器选择指南
J Jasper van Blaaderen1, Casper van Aarle1, David Leibold1
1Delft University of Technology, Faculty of Applied Sciences, Department of Radiation Science and Technology, Mekelweg 15, 2629 JB Delft, The Netherlands.
本研究评估了间接X射线光子计数探测器 (PCD) 的闪光器. 有前途的材料包括化晶体和塑料,但需要使用光倍增器 (SiPMs) 进行工程,以获得最佳性能.
科学领域:
- 医学物理 医学物理
- 材料科学 材料科学 材料科学
- 探测器技术 探测器技术
背景情况:
- 射线光子计数探测器 (PCD) 正在推动医学成像技术的发展.
- 目前的PCD通常使用半导体材料,如CdTe,CZT或Si.
- 另一种方法是将闪器与光倍增器 (SiPM) 结合起来,用于间接的X射线检测.
研究的目的:
- 评估各种闪器类在间接X射线PCD中使用的潜力.
- 为评估闪光灯适用性定义优点数字 (FOM).
- 确定有前途的闪器材料,并讨论它们的工程潜力.
主要方法:
- 定义了四个数字的优点 (FOM):脉冲强度,持续时间,质量和停止功率 (ρZ^3.5).
- 评估了闪器的性能,包括光产量,衰变时间,辐射波长和余光.
- 考虑了诸如自我吸收,像素阵列制造和成本效益等实际方面.
主要成果:
- 确定了有前途的闪器材料类别:Ce3+或Pr3+兴奋剂材料,近频段间隙激子发射器,塑料和核心价值材料.
- 讨论了这些材料的非比例性和密度等局限性.
- 探索了闪器工程技术,如火和代,以提高性能.
结论:
- 间接X射线PCD的闪器选择需要平衡材料特性与SiPM特性 (例如,充电时间,光检测效率).
- 进一步的材料工程对于优化间接PCD性能至关重要.
- 合Ce3+/Pr3+的材料,塑料和核心价值发射器显示出未来X射线探测器开发的潜力.
更多相关视频
11:27Studying Soft-matter and Biological Systems over a Wide Length-scale from Nanometer and Micrometer Sizes at the Small-angle Neutron Diffractometer KWS-2
Published on: December 8, 2016
07:48High Spatial Resolution Chemical Imaging of Implant-Associated Infections with X-ray Excited Luminescence Chemical Imaging Through Tissue
Published on: September 30, 2022
相关概念视频
Photoluminescence: Applications
Inductively Coupled Plasma Atomic Emission Spectroscopy: Instrumentation
There are three main types of inductively coupled plasma atomic emission spectroscopy (ICP-AES) instruments: sequential, simultaneous multichannel, and Fourier transform instruments, with the latter being less commonly used....
Atomic Absorption Spectroscopy: Radiation and Light Sources
Two common narrow-range 'line' sources used in AAS are hollow-cathode lamps (HCLs) and...
