相关实验视频

Updated: May 21, 2025

Coupling Carbon Capture from a Power Plant with Semi-automated Open Raceway Ponds for Microalgae Cultivation

Coupling Carbon Capture from a Power Plant with Semi-automated Open Raceway Ponds for Microalgae Cultivation

Published on: August 14, 2020

评估减排技术在减少发电厂造成的空气污染方面的有效性

Zohar Barnett-Itzhaki^1,2, Shahar Meir², Yuval Rozolio²

¹Ruppin Research Group in Environmental and Social Sustainability, Ruppin Academic Center, Emek Hefer, Israel.

Integrated environmental assessment and management

|March 20, 2025

概括

烟气脱硫 (FGD) 和选择性催化降解 (SCR) 系统显著减少了来自以色列的空气污染.

科学领域:

环境科学环境科学
化学工程是化学工程的重要组成部分.
公共卫生公共卫生

背景情况:

燃煤发电厂是空气污染的主要来源,对人类健康和环境构成风险.
有效的减排技术对于减轻工业来源的排放至关重要.

研究的目的:

评估烟气脱硫 (FGD) 湿洗机和选择性催化降解 (SCR) 系统在减少空气污染方面的有效性.
评估这些技术对以色列燃煤发电厂附近的氧化 (NOx,NO2) 和二氧化硫 (SO2) 度的影响.

主要方法:

从哈德拉发电厂附近的八个监测站分析每小时的空气质量数据.
在FGD和SCR系统安装之前 (2015年) 和之后 (2019年) 的污染物度比较.
使用威尔科克森配对测试和线性回归模型进行统计分析.

主要成果:

在安装减排系统后,平均NOx,NO2和SO2度显著下降.
总平均NOx度在夏季从11.68降至6.88ppb,冬季从9.78降至7.38ppb.
在86.7%的监测站比较中发现了统计学上显著的减少,在22个回归模型中的21个中发现了负相关性.

结论:

烟气脱硫 (FGD) 和选择性催化还原 (SCR) 技术在减少燃煤发电厂造成的空气污染方面非常有效.
实施这些减排技术是改善空气质量和保护公共健康的可行策略.

关键词:

空气污染空气污染石灰石擦洗石灰石擦洗石灰石擦洗石灰石擦洗氧化物氧化物洗机可以洗.二氧化硫二氧化硫的使用情况.

更多相关视频

Operation of a 25 KWth Calcium Looping Pilot-plant with High Oxygen Concentrations in the Calciner

Operation of a 25 KWth Calcium Looping Pilot-plant with High Oxygen Concentrations in the Calciner

Published on: October 25, 2017

Author Spotlight: Scaling Microalgal Biotechnology for Enhanced Biomethane Production

Author Spotlight: Scaling Microalgal Biotechnology for Enhanced Biomethane Production

Published on: March 22, 2024

相关概念视频

Bioremediation

Bioremediation

Bioremediation is the use of prokaryotes, fungi, or plants to remove pollutants from the environment. This process has been used to remove harmful toxins in groundwater as a byproduct of agricultural run-off and also to clean up oil spills.

Atomic Absorption Spectroscopy: Atomization Methods

Atomic Absorption Spectroscopy: Atomization Methods

Atomic Absorption Spectroscopy (AAS) atomizes samples through flame atomization or electrothermal atomization. Flame atomization typically involves a nebulizer and spray chamber assembly to combine the sample with a fuel–oxidant mixture, creating a fine aerosol mist that enters a burner. Typically, the fuel and oxidant are combined in an approximately stoichiometric ratio. However, for atoms that are easily oxidized, a fuel-rich mixture may be more advantageous. Only about 5% of the...