通过多尺度方法对干燥改性SBS青混合物的界面特性,机制和性能进行评估
Zijun Zhang1, Wenda Yan2, Huadong Sun3
1Shandong High-Speed Construction Management Group Co.,Ltd, Shandong Province, Jinan, 250000, China.
Scientific reports
|April 3, 2025
概括
干改造的乙烯-丁-乙烯 (SBS) 提高了青的性能. 最佳的混合条件 (6% SBS,180-185°C,90年代混合,储存30分钟) 可以最大限度地提高路面的效益.
科学领域:
- 材料科学 材料科学 材料科学
- 土木工程 土木工程是指土木工程.
- 聚合物化学 聚合物化学
背景情况:
- 干改造的乙烯-乙烯-乙烯 (SBS) 是一种先进的青改造技术.
- 目前的工程应用缺乏足够的理论支持干改SBS青混合物.
研究的目的:
- 为生产干燥改性SBS青混合物提供实用指南.
- 系统地评估混合条件及其对性能的影响.
- 研究微观机制和宏观性能.
主要方法:
- 利用分子动力学模拟进行微观相互作用分析.
- 采用光显微镜和里埃变换红外光谱仪进行中视镜观测.
- 进行了青混合物的性能测试,用于宏观评估.
主要成果:
- 将干燥修饰的SBS剂量从4%增加到6%,扩散率提高了20%,接口强度提高了32%.
- 最佳的SBS扩散发生在90秒的混合时间.
- 确定最佳制备:6%的SBS,180-185°C,90分混合,储存30分钟.
结论:
- 对于干燥改性SBS青,已建立最佳混合参数.
- 证明最佳条件显著提高了路面的性能.
- 为干燥改性SBS应用提供了全面的理论和实践框架.
相关概念视频
01:24Factors Affecting Workability
64
The workability of concrete is a critical characteristic that influences the ease of mixing, handling, and finishing the concrete. It is affected by several factors including water content, aggregate properties, and admixtures like air entrainment. Water plays a fundamental role as it lubricates the concrete mix, facilitating easier movement and placement. However, the water requirement varies depending on the texture and shape of aggregates. Finer particles and angular, rough-textured...
64
01:20Porosity and Absorption of Aggregate
239
Aggregates contain pores of varying sizes; while some are completely enclosed within the particles, others open onto the surface, allowing water to penetrate. The porosity of aggregates is a major factor contributing to the overall porosity of concrete, given that aggregates constitute about three-quarters of concrete's volume.
When all pores in an aggregate are filled with water, the aggregate is considered saturated and surface-dry. If left in dry air, water will evaporate until the...
When all pores in an aggregate are filled with water, the aggregate is considered saturated and surface-dry. If left in dry air, water will evaporate until the...
239
01:14Design Example: Managing Concrete Workability
65
This example deals with managing the workability of concrete for a raft foundation project under hot weather conditions. Workability is crucial for ensuring the concrete is easy to place, compact, and finish. In this scenario, a slump test — a common method to measure the workability of fresh concrete — initially indicated low workability. This was attributed to the rapid water loss from the concrete mix, exacerbated by the high temperatures causing the course aggregates to heat up.
65
01:10Moisture Content and Bulking of Aggregate
123
The moisture content of aggregates is a crucial factor in construction, particularly in concrete mixing, as it influences the total water required in the mix. Moisture content represents the water coated on the exterior surface of the aggregate existing in a saturated and surface-dry condition. The total water content of a moist aggregate is the sum of its moisture content and water absorption.
When aggregates are exposed to rain or sit in stockpiles, they absorb moisture, which must be...
When aggregates are exposed to rain or sit in stockpiles, they absorb moisture, which must be...
123
01:23Pore Size Distribution
77
In concrete, the pore size distribution significantly influences the material's properties. Capillary pores, markedly larger than gel pores, form a vast network within partially hydrated cement paste, reducing the concrete's strength and increasing its permeability. This heightened permeability leads to a greater risk of damage from environmental factors like freeze-thaw cycles and chemical attacks, with the extent of vulnerability also being tied to the water-to-cement ratio.
Adequate...
Adequate...
77
01:28Effects of Air-entrainment in Concrete
73
Air entrainment in concrete significantly enhances the material's durability, especially in environments subjected to freeze-thaw cycles. Introducing small air bubbles into the concrete mix acts as internal voids that accommodate the expansion of water when it freezes, thereby alleviating internal stress and preventing structural cracks. This function is crucial in climates with significant freezing and thawing, as it protects the concrete from repeated stresses that could lead to premature...
73