相关实验视频
Updated: May 16, 2025

10:51
Evaluating Primary Blast Effects In Vitro
Published on: September 18, 2017
7.9K
在室内对冲击波衰减进行实验和数值调查
Zhangjun Wu1, Dongyan Jin1, Bingbing Yu2
1School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing, 210094, China.
Scientific reports
|April 3, 2025
概括
燃料空气爆炸物 (FAE) 冲击波的持续时间大大降低了室内结构在减弱冲击波方面的有效性. 冲击波持续时间较长会导致波衰减比较低,影响保护工程设计.
科学领域:
- 工程 工程师 工程师 工程师
- 物理 物理学 物理
- 保护结构 保护结构
背景情况:
- 燃气爆炸物 (FAE) 产生具有破坏性的高压,长时间的冲击波,在地下环境中构成风险.
- 在防护工程中,室对于减弱冲击波至关重要.
- 冲击波持续时间对不对称室内结构的衰减能力的影响仍未得到充分研究.
研究的目的:
- 为了研究在不同冲击波持续时间和压力下,双曲室的波衰减特性.
- 分析结构尺寸,持续时间和发生冲击波压力对衰减比的影响.
主要方法:
- 使用自己开发的冲击管进行实验.
- 采用时空保护元素和解决元素 (CESE) 方法进行分析.
- 在不同的持续时间,压力和腔室尺寸下研究波弱化.
主要成果:
- 冲击波持续时间的增加显著降低了波衰减比,当持续时间从0.13秒延长到1.55秒时,观察到35%的下降.
- 发生冲击波压力和室内大小的影响取决于室内处理冲击波和空气流的能力.
- 腔室大小的限制可能导致急剧下降甚至负衰减比,表明冲击波放大.
结论:
- 冲击波持续时间是影响基于室的冲击波减弱结构性能的一个关键因素.
- 室内设计必须考虑发生冲击波的持续时间和压力,以确保有效的保护.
- 这些发现为保护工程中优化室式波弱化结构提供了指导.
更多相关视频
05:44Author Spotlight: Development of a Laser-Induced Shock Wave Animal Model Without Tympanic Membrane Perforation
Published on: March 1, 2024
491
10:52Conducting Elevated Temperature Normal and Combined Pressure-Shear Plate Impact Experiments Via a Breech-end Sabot Heater System
Published on: August 7, 2018
8.5K
相关概念视频
Shock Waves
2.0K
While deriving the Doppler formula for the observed frequency of a sound wave, it is assumed that the speed of sound in the medium is greater than the source's speed through it. When this condition is breached, a shock wave occurs.
When the source's speed approaches the speed of sound, constructive interference between successive wavefronts emitted by the source occurs immediately behind it. Initially, scientists believed that this constructive interference would result in such high...
When the source's speed approaches the speed of sound, constructive interference between successive wavefronts emitted by the source occurs immediately behind it. Initially, scientists believed that this constructive interference would result in such high...
2.0K
Deriving the Speed of Sound in a Liquid
455
As with waves on a string, the speed of sound or a mechanical wave in a fluid depends on the fluid's elastic modulus and inertia. The two relevant physical quantities are the bulk modulus and the density of the material. Indeed, it turns out that the relationship between speed and the bulk modulus and density in fluids is the same as that between the speed and the Young's modulus and density in solids.
The speed of sound in fluids can be derived by considering a mechanical wave...
The speed of sound in fluids can be derived by considering a mechanical wave...
455
Sound as Pressure Waves
2.2K
Sound waves, which are longitudinal waves, can be modeled as the displacement amplitude varying as a function of the spatial and temporal coordinates. As a column of the medium is displaced, its successive columns are also displaced. As the successive displacements differ relatively, a pressure difference with the surrounding pressure is created. The gauge pressure varies across the medium.
The pressure fluctuation depends on the difference in displacements between the successive points in the...
The pressure fluctuation depends on the difference in displacements between the successive points in the...
2.2K