延迟凝酸用于高温碳酸盐储酸化:延迟性和机制研究研究

Retarders are chemical admixtures designed to extend the setting time, which is especially useful when there is a delay in sequential concrete pours to prevent cold joints and to achieve a cohesive structure. Retarders, when used in appropriate amounts, can also enhance the architectural appearance of exposed aggregate finishes.
The function of retarders is to delay the setting of concrete, and this effect can be measured using a penetration test. The retardation process involves adding...

Atmospheric CO2 penetrates the concrete's pores and, in the presence of moisture, forms carbonic acid, which then reacts with calcium hydroxide in the hydrated cement, forming calcium carbonate. This process reduces the concrete's volume and is termed carbonation shrinkage.
The concrete's permeability is slightly reduced as calcium carbonate produced during the reaction fills its pores. Furthermore, its strength is slightly enhanced as the water released during the reaction...

When acids come into contact with concrete, they initiate a chemical reaction that dissolves the hydrated cement paste. This process leads to softening and structural weakening of the concrete. This issue is commonly observed in environments such as chimneys, sewers, and industrial settings. The severity of the damage increases as the pH of the water interacting with the concrete drops below 6.5. In particular, a pH under 4.5 can cause significant concrete damage.
The rate at which hydrogen...

In the complex environment of the gastric lumen, excessive acid secretion can lead to the formation or worsening of ulcers within the delicate mucosal layer. Antacids, such as sodium bicarbonate and calcium carbonate, provide relief by neutralizing this acid, transforming it into harmless salt and water. This neutralization process raises the gastric pH from a highly acidic level of 1 to a more basic 3-4, reducing the acidity within the stomach.
However, this neutralization reaction between...

The titration of a polyprotic base such as sodium carbonate with a strong acid such as hydrochloric acid results in two equivalence points on the titration curve. At the first equivalence point, the carbonate ions in the base are completely converted to bicarbonate ions. The second equivalence point corresponds to the complete conversion of bicarbonate ions to carbonic acid, which dissociates into carbon dioxide and water. The region before the first equivalence point corresponds to the...

In acid-base chemistry, the leveling effect refers to the limitation imposed by the solvent on the strength of acids and bases in solution. When a base stronger than the solvent's conjugate base is used, it deprotonates the solvent until the base is entirely consumed, making it ineffective against weaker acids. Conversely, an acid stronger than the solvent's conjugate acid protonates the solvent until the acid is depleted, rendering it ineffective against weaker bases. Essentially, the...