相关实验视频

Updated: May 14, 2025

A Simple and Inexpensive Running Wheel Model for Progressive Resistance Training in Mice

A Simple and Inexpensive Running Wheel Model for Progressive Resistance Training in Mice

Published on: April 28, 2022

用干电极技术加工的低电阻LiFePO₄厚膜电极,用于高能量密度离子电池

Kihwan Kwon^1,2, Jiwoon Kim³, Seungmin Han^1,3

¹Energy Storage Materials Center Korea Institute of Ceramic Engineering and Technology Jinju 52851 Republic of Korea.

|April 11, 2025

概括

铁酸盐 (LiFePO4) 阴极为储能提供了一个低成本,稳定的替代方案. 一种新的干燥加工方法提高了LiFePO4电极的性能,实现了高容量和竞争力的能量密度.

科学领域:

材料科学材料科学材料科学
电化学电化学电化学
储能储能储能储能储能储能

背景情况:

铁酸盐 (LiFePO4) 是一个有前途的阴极材料,由于其丰富,低成本和结构稳定性,为基阴极提供了替代品.
LiFePO4的实际应用受到低能量密度和高离子/电阻的阻碍.
现有的LiFePO4阴极在实现高活性物质负载和均组件分布方面面临挑战.

研究的目的:

为LiFePO4电极开发一种新的干燥加工方法,以克服能量密度和电阻的限制.
研究干燥加工对电极结构,离子传输和整体电化学性能的影响.
为了证明干燥加工的LiFePO4电极与最先进的电池技术相比具有竞争力.

主要方法:

一份关于LiFePO4电极干燥加工技术的首次报告,重点关注高活性材料负载.
使用聚合物粘合剂和导电添加剂,使干燥工艺促进均分布.
结合聚四乙烯 (PTFE) 来创建类似桥梁的连接,以增强离子运输.

主要成果:

干燥加工的 LiFePO4 电极实现了 7.8 mAh cm-2.2 的高面积容量.
证明了卓越的循环稳定性,在全电池运行时保持超过300个循环的性能.
带有干处理电极的镜电池的估计能量密度与基于Li[Ni1-xMnxCo x]O2的电池具有竞争力.

结论:

干燥加工方法有效地提高了LiFePO4电极的性能,通过使高活性材料负载和降低电阻.
开发的电极表现出优越的电化学性能,包括高容量和长期稳定性.
这一进步将干处理的LiFePO4定位为下一代储能器件的竞争性阴极材料.

关键词:

干燥过程干燥过程.离子电池离子电池酸铁酸是的铁酸.聚四乙烯 (PET) 是一种聚四乙烯 (PET) 的一种.

更多相关视频

Focused Ion Beam Fabrication of LiPON-based Solid-state Lithium-ion Nanobatteries for In Situ Testing

Focused Ion Beam Fabrication of LiPON-based Solid-state Lithium-ion Nanobatteries for In Situ Testing

Published on: March 7, 2018

High-Resolution Respirometry to Assess Bioenergetics in Cells and Tissues Using Chamber- and Plate-Based Respirometers

High-Resolution Respirometry to Assess Bioenergetics in Cells and Tissues Using Chamber- and Plate-Based Respirometers

Published on: October 26, 2021

相关概念视频

Design Example: Frog Muscle Response

Design Example: Frog Muscle Response

A student is tasked to work on an intriguing experiment involving an RL (Resistor-Inductor) circuit to study the muscle response of a frog's leg to electrical stimulation. The RL circuit plays a crucial role in this experiment, providing the means to control and measure the electrical impulses that trigger muscle contraction.
When the switch connecting the RL circuit is closed, a brief muscle contraction is observed. This is because, at a steady state, the inductor acts like a short...

Lossless Lines

Lossless Lines

In electrical engineering, a lossless transmission line is characterized by a purely imaginary propagation constant and a resistive characteristic impedance. The ABCD parameters, which describe the relationship between the input and output voltages and currents, indicate an equivalent π circuit with an imaginary series impedance and a shunt admittance. This results in a transmission line that, when the product of the phase constant (beta) and the length of the line is less than pi,...

Ohm's Law

Ohm's Law

Resistors are fundamental components in electrical circuits, often manufactured from metallic alloys or carbon compounds. They model a material's ability to resist the flow of electric current, a characteristic that is crucial in controlling and regulating electrical power within a circuit.
This current-resisting behavior of resistors is governed by Ohm's law, which states that the voltage across a resistor is directly proportional to the current flowing through it.

Laminar Flow

Laminar Flow

Laminar flow represents a smooth, orderly fluid motion where particles move along parallel paths, resulting in minimal mixing between layers. Streamlined particle paths characterize this flow regime and occur under conditions where viscous forces dominate over inertial forces. The distinction between laminar, transitional, and turbulent flow is primarily determined by the Reynolds number, a dimensionless quantity calculated as:

Resistance

Resistance

When a current moves through any conductor, the conductor causes some level of difficulty for the current to flow. The measure of that difficulty is known as the resistance of the material and is represented by R. Every material has its own resistance. In the case of conductors, heat is emitted whenever a current passes through them. Resistance depends on the resistivity of the material. Resistivity is a characteristic of the material used to fabricate electrical components, whereas the...

External and Internal Respiration

External and Internal Respiration

External respiration occurs in the lungs, and it is the first step in the journey of oxygen inside the body. When we inhale, oxygen enters our lungs and diffuses across the thin alveolar membrane. The alveoli are tiny, air-filled sacs that provide a vast surface area for gas exchange. Oxygen in the alveoli has a higher partial pressure (105 mmHg) than in the adjacent pulmonary capillaries (40 mmHg), establishing a pressure gradient. As a result, oxygen molecules move from the alveoli into the...