相关实验视频

Updated: May 10, 2025

Morphology Control for Fully Printable Organic–Inorganic Bulk-heterojunction Solar Cells Based on a Ti-alkoxide and Semiconducting Polymer
08:29

Morphology Control for Fully Printable Organic–Inorganic Bulk-heterojunction Solar Cells Based on a Ti-alkoxide and Semiconducting Polymer

Published on: January 10, 2017

9.0K

有机太阳能电池效率为20.49%,由固体添加剂和非化溶剂启用

Longfei Liu1,2, Hui Li1,2, Juxuan Xie1,2

  • 1Institute of Polymer Optoelectronic Materials and Devices, State Key Laboratory of Luminescent Materials and Devices, School of Materials Science and Engineering, South China University of Technology, Guangzhou, 510640, P. R. China.

Advanced materials (Deerfield Beach, Fla.)
|April 26, 2025
PubMed
概括

研究人员开发了一种新的非基添加剂,4--二 (NBN),以改善有机太阳能电池 (OSC). 这种基于的固体添加剂 (BSA) 通过优化膜形态来提高设备效率和性能.

关键词:
基固体添加剂是基于的固体添加剂不含化合物的非化合物有机太阳能电池是有机太阳能电池.强大的电子吸收组.

更多相关视频

In situ Grazing Incidence Small Angle X-ray Scattering on Roll-To-Roll Coating of Organic Solar Cells with Laboratory X-ray Instrumentation06:49

In situ Grazing Incidence Small Angle X-ray Scattering on Roll-To-Roll Coating of Organic Solar Cells with Laboratory X-ray Instrumentation

Published on: March 2, 2021

6.2K
Developing High Performance GaP/Si Heterojunction Solar Cells10:31

Developing High Performance GaP/Si Heterojunction Solar Cells

Published on: November 16, 2018

7.4K

相关概念视频

P-N junction01:11

P-N junction

A p-n junction is formed when p-type and n-type semiconductor materials are joined together. At the interface of the p-n junction, holes from the p-side and electrons from the n-side begin to diffuse into the opposite sides due to the concentration gradient. This diffusion of carriers leads to a region around the junction where there are no free charge carriers, known as the depletion region. The charge density within the depletion region for the n-side and p-side can be described by the...
395