不同的皮质全接 (Y-Knot RC®) 插入点和深度 vs 平面插入对其生物机械性能的影响
Dalos Dimitris1, Grisolia Seifert Eric2, Fiedler Imke2
1UKE Athleticum - Center for Athletic Medicine, University Medical Center Hamburg-Eppendorf, Hamburg, Germany; Institute of Interdisciplinary Exercise Science and Sports Medicine, MSH Medical School Hamburg, Germany; Department of Trauma and Orthopaedic Surgery, University Medical Center Hamburg-Eppendorf, Hamburg, Germany.
为了获得最佳的生物机械性能,全接 (ASA) 需要距离皮质-形接口至少4mm的距离. 插入深度没有影响拉出强度,但增加了结构刚性.
科学领域:
- 骨科生物机械学 骨科生物机械学
- 手术 anchor技术的使用方法
背景情况:
- 评估全接 (ASA) 插入点对于最佳生物机械性能至关重要.
- 了解插入深度对稳定性的影响,对于手术成功至关重要.
研究的目的:
- 为了确定ASA插入到皮层-cancellous接口的最小距离,而不会损害生物机械性能.
- 为了比较深度和平面ASA插入深度之间的生物力学差异.
主要方法:
- 30个全接 (Y-Knot RC) 被测试在模仿部头皮质-状接口的人造骨上.
- 从接口处插入0mm,2mm和4mm的,插入深度为25mm (平面) 和35mm (深).
- 循环拉出测试测量了最大的拉出力,结构刚度和在第一个动时的负载.
主要成果:
- 在4毫米距离 (184±38 N) 的最大拉力是最高的,而0毫米 (144±6 N,p=0.041) 的最大拉力是最高的.
- 在深层和平板插件之间没有观察到拉出力或初始运动的显著差异.
- 在深插入组 (16±4 N/mm vs. 11±1 N/mm) 中,构造刚度显著更高.
结论:
- 建议将所有接插入到皮质-状接口的距离至少为4毫米,以获得最佳的拔出强度.
- 更大的插入深度不会损害拉出强度,但会增强构造的刚性.
更多相关视频
09:07An Anesthesia, Surgery, and Harvest Method for the Evaluation of Transpedicular Screws Using an In Vivo Porcine Lumbar Spine Model
Published on: May 31, 2017
04:19Minimally Invasive Treatment for Thoracolumbar Burst Fracture Using Sagittal Alignment Screws and A Trauma Reduction Device
Published on: November 8, 2024
