相关实验视频

Updated: May 3, 2026

Remote Magnetic Navigation for Accurate, Real-time Catheter Positioning and Ablation in Cardiac Electrophysiology Procedures
09:13

Remote Magnetic Navigation for Accurate, Real-time Catheter Positioning and Ablation in Cardiac Electrophysiology Procedures

Published on: April 21, 2013

27.8K

通过在碳离子放射治疗期间的网络安全激活引发的起器故障:一个案例报告

Eisuke Horigome1, Nobuteru Kubo1, Makoto Sakai1

  • 1Department of Radiation Oncology, Gunma University Graduate School of Medicine, Maebashi, JPN.

Cureus
|June 11, 2025
PubMed
概括

碳离子放射治疗 (CIRT) 很少会因为中子干扰而导致心脏植入式电子设备 (CIED) 发生故障. 一名患有肺癌的患者在CIRT期间经历了心脏起器网络安全激活,导致治疗中止,并强调需要强有力的安全协议.

关键词:
碳离子辐射疗法 碳离子辐射治疗一个心脏植入式电子设备.网络安全功能是网络安全功能.高能中子高能中子功能故障 功能故障这是一个心脏起器.

更多相关视频

A New Single Chamber Implantable Defibrillator with Atrial Sensing: A Practical Demonstration of Sensing and Ease of Implantation16:40

A New Single Chamber Implantable Defibrillator with Atrial Sensing: A Practical Demonstration of Sensing and Ease of Implantation

Published on: February 28, 2012

26.2K
Real-Time Cardiac Mapping with a Noninvasive Imageless Electrocardiographic Imaging System10:17

Real-Time Cardiac Mapping with a Noninvasive Imageless Electrocardiographic Imaging System

Published on: April 11, 2025

430

相关概念视频

Carrier Generation and Recombination01:22

Carrier Generation and Recombination

Carrier generation is the process by which electron-hole pairs (EHPs) are created within the semiconductor. In direct-bandgap semiconductors, such as gallium arsenide (GaAs), this occurs efficiently when energy absorption prompts valence electrons to leap into the conduction band, leaving behind holes.
This process is given by the generation rate G and is efficient due to the conservation of momentum between the valence band maximum and conduction band minimum.
Indirect generation involves an...
1.5K
Pilot and Numeric Relaying01:21

Pilot and Numeric Relaying

Pilot relaying is a type of differential protection used in power systems. It compares electrical quantities at the terminals of equipment via a communication channel instead of direct relay interconnection. This method is essential for transmission lines where the terminals are far apart, typically up to 80 km for lines with 69 to 115 kV ratings. Four types of communication channels are used for pilot relaying:
589