用于多层血液过器件的聚乙烯硫平板膜的设计
Rei Kono1, Takashi Ota1, Yoshihiko Kanno2
1Department of Mechanical Engineering, Keio University, Yokohama, Kanagawa, Japan.
PloS one
|June 20, 2025
概括
使用聚乙硫膜的多层血液透析设备为可植入应用提供无血流. 较厚的膜 (超过80微米) 提供足够的机械强度,以确保安全有效的透析.
科学领域:
- 生物医学工程 生物医学工程
- 材料科学 材料科学 材料科学
背景情况:
- 多层血液透析器件比空心纤维器件具有优势,特别是对于植入式应用,因为它消除了对外部的需求.
- 这是由于与空心纤维相比,跨多层膜的压力损失明显较低.
研究的目的:
- 为了研究聚乙硫 (PES) 平板薄膜的机械强度和透析效率,用于多层血液透析设备.
- 为了确定植入式多层血液透析应用的最佳膜厚.
主要方法:
- 厚度从40到160微米的PES平板薄膜是使用液体反向方法与受控旋转涂层制造的.
- 膜的机械强度根据ISO 8637-1:2017协议进行了评估.
- 在体外和体外透析实验中,使用80微米膜和老鼠模型进行了透析实验.
主要成果:
- 厚度大于80微米的膜具有能够承受高达500mmHg压力的机械强度,满足透析应用的要求.
- 在大鼠模型中,用80微米PES膜取得了成功的体外和体外表现.
- 80微米厚度被确定为多层血液透析器件的最佳.
结论:
- 厚度大于80微米的聚乙硫膜具有足够的机械完整性,用于无多层血液透析设备.
- 80微米的PES膜是开发先进的可植入透析系统的合适候选者.
- 这项研究支持开发更简单,更轻的血液透析系统,减少患者负担.
相关概念视频
Dialysis
825
Dialysis is a diffusion-based purification process that separates analyte molecules from a complex matrix. This is accomplished by allowing molecules in the solution to pass through a semipermeable membrane into a liquid on the other side. The membrane is usually made of cellulose acetate or cellulose nitrate, and the second liquid must be miscible with the solution. Ions (e.g., chloride or sodium) or organic molecules (e.g., glucose) can pass through the membrane pores, which generally have...
825
Hemodialysis II: Procedure and Complications
146
DialyzersA hemodialysis (HD) dialyzer is a plastic cartridge containing thousands of parallel hollow fibers, which serve as semipermeable membranes. These fibers are typically made from cellulose-based or other synthetic materials. During HD, blood is pumped into the top of the cartridge and distributed among these fibers. Simultaneously, dialysis fluid, known as dialysate, is introduced into the bottom of the cartridge, bathing the outside of the fibers. Across the semipermeable membrane,...
146


