影响地质聚合物巩固的因素,以稳定电泥
Francesco Genua1, Mattia Giovini1, Elisa Santoni2
1Department of Engineering "Enzo Ferrari", University of Modena and Reggio Emilia, 41125 Modena, Italy.
Materials (Basel, Switzerland)
|July 12, 2025
概括
基于甲的地质聚合物有效地固定了化污泥中的重金属. 优化制备方法显著提高了和的稳定性,显示了危险废物管理的前景.
科学领域:
- 材料科学 材料科学 材料科学
- 环境工程 环境工程
- 无机化学 无机化学 有机化学
背景情况:
- 电污泥是一种含有有毒重金属的危险废物,如,和铁.
- 传统的废弃物处理方法由于金属的浸而带来环境风险.
- 地质聚合提供了一个潜在的解决方案,用于固定工业废物中的重金属.
研究的目的:
- 调查基于甲的地质聚合物在化污泥中的重金属固化和稳定中的有效性.
- 评估各种因素对冷凝固和重金属固定的影响.
- 评估地质聚合物对潜在建筑应用的机械性能和耐用性.
主要方法:
- 使用氧化和酸盐激活剂制备了基于甲甲的地质聚合物糊.
- 研究的因素包括NaOH度,激活剂制备时间,污泥添加序列和废物含量.
- 描述涉及XRD,FT-IR,ESEM,压力强度,水稳定性和浸出测试 (欧盟法规).
主要成果:
- 地质聚合显著降低了化污泥中的重金属透性.
- 优化制备序列 (在甲醇激活后添加污泥) 将固定率从83%提高到89%.
- 提前24小时准备激活溶液,对的固定性进一步提高到95%,对的百分比非常高.
结论:
- 基于甲的地质聚合物有效地固定了化污泥中的重金属.
- 优化制备方法对于最大限度地稳定重金属至关重要.
- 开发的地质聚合物显示出安全处置和在建筑应用中潜在的重复使用的潜力.
相关概念视频
Colloidal precipitates
769
The high insolubility of some precipitates can result in an unfavorable relative supersaturation. This can lead to colloidal particles with a large surface-to-mass ratio, where adsorption is promoted. For instance, in the precipitation of silver chloride, silver ions are adsorbed on the surface of the colloidal particles, forming a primary layer. This layer attracts ions of opposite charge (such as nitrate ions), forming a diffuse secondary layer of adsorbed ions. This electric double layer...
769
Plasticizers
116
Water-reducers, or plasticizers, are chemical admixtures used in concrete to improve strength and workability. These additives reduce the water-cement ratio without compromising workability, lower the cement content while maintaining the same workability, or increase workability to assist concrete placement in inaccessible areas.
Plasticizers function by using surface-active agents to create repulsive electrostatic forces between cement particles. This dispersion enhances the concrete's...
Plasticizers function by using surface-active agents to create repulsive electrostatic forces between cement particles. This dispersion enhances the concrete's...
116
Factors Affecting Solubility
33.9K
Compared with pure water, the solubility of an ionic compound is less in aqueous solutions containing a common ion (one also produced by dissolution of the ionic compound). This is an example of a phenomenon known as the common ion effect, which is a consequence of the law of mass action that may be explained using Le Chȃtelier’s principle. Consider the dissolution of silver iodide:
33.9K
Coagulation
380
Colloidal solids are solid particles suspended in solution. They are usually negatively charged, attracting a compact primary layer of positively charged ions, which attract more counterions to form an electrical double layer. Electrostatic repulsion between the charged double layers prevents the particles from colliding, stabilizing the colloids. These solids are often undesirable because they can contain toxins that are difficult to remove. Coagulation is a technique that helps aggregate and...
380
Superplasticizers
122
Superplasticizers are advanced admixtures that enhance the workability of concrete by lowering the water content without compromising the strength of the material. These substances are highly effective water reducers, improving concrete flow, making it easier to work with, and enabling concrete to reach inaccessible areas or densely reinforced sections without mechanical vibration. The key components in superplasticizers are either sulfonated melamine or naphthalene formaldehyde condensates,...
122
Factors Affecting Dissolution: Particle Size and Effective Surface Area
1.0K
Dissolution kinetics, an essential aspect of oral drug delivery, is significantly influenced by the drug's particle size. According to the Noyes-Whitney dissolution model, the dissolution rate correlates directly with the drug's surface area. The larger the surface area, the higher the drug's solubility in water, leading to a faster drug dissolution rate. Reducing particle size increases the effective surface area, enhancing the dissolution process. Micronization and nanosizing are...
1.0K


