乳房应用的弹性模块成像使用基于虚拟场的方法在准静态超声波弹性图像中
Anne-Lise Duroy1, Olivier Basset1, Elisabeth Brusseau1
1INSA Lyon, Université Claude Bernard Lyon 1, UMR CNRS 5220, Inserm U1294, Lyon, Université Jean Monnet, Saint Étienne, France.
Ultrasonic imaging
|July 24, 2025
概括
本研究介绍了一种虚拟场方法,用于使用超声波弹性学重建乳腺组织度. 该方法准确地绘制了幽灵和患者数据的刚度变化,有助于病理学检测.
科学领域:
- 生物医学工程 生物医学工程
- 医疗成像医学成像
- 计算力学 计算力学 计算力学
背景情况:
- 准确检测和描述乳腺病理非常重要.
- 准静态超声波弹性学为组织机械性质提供了洞察力.
- 从弹性学数据中重建组织特性是具有挑战性的,原因是错误的逆问题和有限的数据.
研究的目的:
- 调查基于虚拟场的方法,从内部位移和应用力来重建模块图.
- 评估该方法在平面应力条件下的性能,解决3D数据缺乏的问题.
- 在模拟,幻影和患者数据中评估方法的准确性.
主要方法:
- 利用基于虚拟场的方法来解决组织属性重建的反向问题.
- 假设线性弹性和同位体介质,应用平面应力条件来处理2D位移数据.
- 使用平面应力模拟,3D模拟,幻影实验和体内患者数据验证了该方法.
主要成果:
- 重建的模图成功地揭示了所有测试媒体的刚度变化.
- 刚度对比在平面应力模拟中被准确估计,但在3D模拟中被低估.
- 当区域大小和位置大于像素时,正确估计区域大小和位置,在模拟和实验数据中一致.
- 在体内结果显示,纳入到背景的模量比为癌瘤的6.61和纤维腺瘤的4.57.
结论:
- 虚拟场方法有效地重建度图,用于检测乳腺病理.
- 平面应力假设会影响3D场景的准确性,但空间定位仍然可靠.
- 该方法对临床应用有希望,提供与现有文献相一致的定量度估计.
更多相关视频
12:18Magnetic Resonance Elastography Methodology for the Evaluation of Tissue Engineered Construct Growth
Published on: February 9, 2012
12.5K
07:57Viscoelastic Characterization of Soft Tissue-Mimicking Gelatin Phantoms using Indentation and Magnetic Resonance Elastography
Published on: May 10, 2022
2.2K
相关概念视频
01:24Imaging Studies II: Ultrasonography
57
IntroductionUltrasonography, or renal ultrasound, is a noninvasive medical imaging technique that uses high-frequency sound waves to visualize the kidneys, ureters, bladder, and surrounding tissues.Indications for Urinary System UltrasonographyUrinary system ultrasonography is indicated in various clinical scenarios, such as:Kidney Stones (Urolithiasis): To detect and monitor the size and presence of kidney or urinary tract stones.Hydronephrosis: To assess the dilation of the renal pelvis and...
57
01:25Ultrasound II: Endoscopic Ultrasound and FibroScan
202
Endoscopic Ultrasound (EUS) and FibroScan are valuable diagnostic tools in gastroenterology and hepatology, each with specific applications and techniques.
Endoscopic Ultrasound (EUS):
Endoscopic Ultrasound (EUS):
202
01:16Dynamic Modulus of Elasticity of Concrete
549
The dynamic modulus of elasticity assesses how a concrete structure deforms under impact or dynamic loads. It is typically higher than the static modulus of elasticity, measured under slow, steady loading conditions.
The sonic test is a common method to determine the dynamic modulus. In this test, a concrete beam, sized either 6 x 6 x 30 inches or 4 x 4 x 20 inches, is clamped at its center. Vibrations are initiated at one end of the beam by an electromagnetic exciter unit powered by...
The sonic test is a common method to determine the dynamic modulus. In this test, a concrete beam, sized either 6 x 6 x 30 inches or 4 x 4 x 20 inches, is clamped at its center. Vibrations are initiated at one end of the beam by an electromagnetic exciter unit powered by...
549
01:17Ultrasonography
6.1K
Ultrasonography is an imaging technique that uses high-frequency sound waves to visualize the body's internal structures. It is a non-invasive and safe procedure that does not involve the use of ionizing radiation, making it widely used in various medical fields. Ultrasonography is used to study heart function, blood flow in the neck or extremities, certain conditions such as gallbladder disease, and fetal growth and development.
During an ultrasonography procedure, a handheld device called...
During an ultrasonography procedure, a handheld device called...
6.1K
01:20Elastic Strain Energy for Shearing Stresses
291
As discussed in previous lessons, strain energy in a material is the energy stored when it is elastically deformed, a concept crucial in materials science and mechanical engineering. This energy results from the internal work done against the cohesive forces within the material. When a material undergoes shearing stress and corresponding shearing strain, the strain energy density, which is the energy stored per unit volume, is calculated. Within the elastic limit, where the stress is...
291
01:15Strain and Elastic Modulus
4.1K
The quantity that describes the deformation of a body under stress is known as strain. Strain is given as a fractional change in either length, volume, or geometry under tensile, volume (also known as bulk), or shear stress, respectively, and is a dimensionless quantity. The strain experienced by a body under tensile or compressive stress is called tensile or compressive strain, respectively. In contrast, the strain experienced under bulk stress and shear stress is known as volume and shear...
4.1K