相关实验视频
Updated: Sep 13, 2025

08:43
Fused Filament Fabrication FFF of Metal-Ceramic Components
Published on: January 11, 2019
17.4K
关于由中SiO2度制成的流体颗粒强度的实验研究
Xin Jiang1,2, Yunfei Xie1, Qingyu Wang1
1Key Laboratory for Ecological Metallurgy of Multimetallic Mineral (Ministry of Education), Northeastern University, Shenyang 110819, China.
ACS omega
|July 29, 2025
概括
优化流体铁矿石颗粒具有特定的基本性和MgO含量可以提高压力强度. 这项研究提供了使用各种矿石资源节能铁制造工艺的关键参数.
科学领域:
- 金与材料科学 金与材料科学
- 化学工程是化学工程的重要组成部分.
- 矿物加工 矿物加工
背景情况:
- 在铁制造中增加颗粒比例可以节省能源.
- 流体颗粒需要CaO和MGO来保持渣的特性.
- 由于低SiO2度的有限可用性,需要使用中等SiO2矿石.
研究的目的:
- 研究基本性和MgO含量对绿色和燃烧颗粒强度的影响.
- 确定中等SiO2流体颗粒的最佳流量参数.
- 提供流量参数选择和扩大矿石资源利用的理论基础.
主要方法:
- 制备具有不同基本度 (R) 和MgO重量百分比 (w(MgO)) 的中等SiO2流体颗粒.
- 绿色和烧焦颗粒的压缩测试.
- 分析基本性和MgO含量对颗粒强度的影响.
主要成果:
- 颗粒压力强度在基本度R=0.5 (对于w(MgO) =0.5%-2.0%) 和w(MgO) =0.5% (对于R=0.0062-2.0) 的峰值.
- 确定为基本性R=0.5和w(MgO) =0.5%的最佳条件.
- 在最佳条件下,绿色和燃烧颗粒强度都符合高炉运行要求.
结论:
- 基本性和MgO含量显著影响流体颗粒强度.
- 最佳流量参数 (R=0.5,w(MgO) =0.5%) 确保高炉作业的颗粒强度足够.
- 结果支持使用中SiO2铁矿石资源用于流体颗粒生产.
相关概念视频
Sample Preparation for Analysis: Advanced Techniques
456
Accurate analysis of complex samples often requires advanced preparation techniques to achieve reliable and reproducible results. Samples containing inorganic or organic materials can be challenging to dissolve or decompose effectively. Standard sample preparation methods include acid digestion, fusion, dry ashing, and wet digestion.
Acid digestion with strong acids is commonly used to dissolve inorganic materials that are insoluble (do not dissolve) in water. This method can be useful for...
Acid digestion with strong acids is commonly used to dissolve inorganic materials that are insoluble (do not dissolve) in water. This method can be useful for...
456
Washing, Drying, and Ignition of Precipitates
1.1K
After filtration, the precipitate is washed to remove coprecipitated impurities and any remaining mother liquor. Colloidal precipitates, such as silver chloride, are washed with an electrolyte (such as dilute nitric acid) to prevent the peptization of the precipitate. In the case of slightly soluble precipitates, the wash solution contains a common ion to reduce solubility. Lead sulfate, which is slightly soluble in water, is washed with dilute sulfuric acid. Similarly, wash solutions may be...
1.1K

